SCS 175 Sub (serv.man3) - JBL Audio Service Manual (repair manual)

scs 175 sub (serv.man3) service manual
Model
SCS 175 Sub (serv.man3)
Pages
13
Size
1.81 MB
Type
PDF
Document
Service Manual
Brand
Device
Audio
File
scs-175-sub-sm3.pdf
Date

Read JBL SCS 175 Sub (serv.man3) Service Manual online

TM
SCS175
(230V)
®
Harman International SNC - Harman Consumer International    2, route de Tours    72500 Château du Loir       FRANCE
PRELIMINARY 
Service - Technical Manual
SCS satellite
Freq. Resp.: 90-22000 Hz
Crossover: 4 kHz
Sensitivity: 86 dB
Nom. Imp.: 8 Ohms
Recommended amp.:
25-100 Watts
Drivers:
100 mm woofer / 
10 mm polymer tweeter
Dimensions (HxWxD):
230 x 140 x 164 mm
Weight: 2,5 kg
SCS center
Freq. Resp.: 120-22000 Hz
Crossover: 3 kHz
Sensitivity: 88 dB
Nom. Imp.: 8 Ohms
Recommended amp.:
25-100 Watts
Drivers:
Two 100 mm woofer / 
10 mm polymer tweeter
Dimensions (HxWxD):
160 x 410 x 159 mm
Weight: 4 kg
SCS active sub-
woofer
Low-freq. cut-off: 36 Hz
High-freq. cut-off: 
Adjustable 40-130 Hz
Built-in power amp.: 
110 Watts
Driver:
210 mm long throw woofer
Dimensions (HxWxD):
350 x 295 x 350 mm
Weight: 11 kg
SCS 175 Technical Specifications
Refinements may be made on occasion to existing products without notice, but will always meet or
exceed original specifications unless otherwise stated.
©
2001 JBL, Incorporated. JBL and Simply Cinema
are registered trademarks of JBL, Incorporated.
Printed 06/2001 
Part No. SCS175OM230V
A Harman International Company
Declaration of Conformity
2, route de Tours
72500 Château-du-Loir
France
declare in own responsibility, that the product
described in this owner’s manual is in compliance 
with technical standards:
EN 55013/A12:1994
EN 55020:1994 
EN 55022:1994 class B
EN 61000-3-2:1995
EN 61000-3-3:1995
Luc Emmanuel Godard
Harman Consumer International
France.06/01
1
On shelves.
On the wall.
Mounting Options
On optional stands.
Subwoofer
Surround Speakers
150-180 cm
Satellites and Surrounds
one.
Speaker Placement
Satellites
The customer is responsible for
proper selection and use of
mounting hardware, available
through hardware stores, to
properly and safely wall-mount
the speakers.
Always start with the subwoofer
as close to one of the front cor-
ners as possible to take advan-
tage of solid-angle gains. If you
get too much bass, adjust the
”VOLUME” towards ”MIN”. The
result will be lower distortion
and higher reliability. If the
excessive bass is at one or more
discrete frequencies, then it
might be necessary to consider
dealing with room modes. 
Here are your options: 
• Modify the acoustical coupl-
ing of the subwoofer to the
room boundaries and/or the 
room modes, i.e. move the
subwoofer.
• Modify the acoustical cou-
pling of the listener to the
room boundaries and/or the
room modes, i.e. move the
listener.
• Move both the subwoofer and
the listener.
2
Center
+      –
+      –
+      –
Left Front
+      –
Left Surround
Center
Right Front
+      –
Right Surround
Receiver
+      –
Left Front sat.
–      +
Right Front sat.
–      +
Left Surround sat.
+      –
Right Surround sat.
+      –
Serie no.
Made in Denmark
Harman Consumer International
TM
SCS175
 (230V)
simple
setup guide
two.
Speaker Connections
Separate and strip the ends of
the speaker wire as shown.
Speakers and amplifiers/-
receivers have corresponding
(+) and (–) terminals. The (+)
lead of the speaker wire is
noted with a stripe. It is impor-
tant to connect all the speakers
identically: (+) on the speaker
to (+) on the amplifier and (–)
on the speaker to (–) on the
amplifier. Wiring “out of phase”
results in thin sound, weak bass
and a poor stereo image.
Connection Tips
Speaker Level
3
Page of 13
Display

Download JBL SCS 175 Sub (serv.man3) Service Manual (Repair Manual)

Here you can read online and download JBL SCS 175 Sub (serv.man3) Service Manual in PDF. SCS 175 Sub (serv.man3) service manual will guide through the process and help you recover, restore, fix, disassemble and repair JBL SCS 175 Sub (serv.man3) Audio. Information contained in service manuals typically includes schematics / circuit diagrams, wiring diagrams, block diagrams, printed wiring boards, exploded views, parts list, disassembly / assembly, pcb.