Read JBL RADIAL MICRO (serv.man2) EMC - CB Certificate online
Page 4 of 99 ST-06153
TRF No.: IECEN60950_1A
Summary of testing:
1.6.2 Input current test
1.7.13 Marking durability test
2.1.1.1 b Finger test
2.1.1.1 c Pin test
2.1.1.5 Energy hazards test
2.1.1.7 Stored Discharge on capacitor test
2.2.2 Voltages under normal conditions test
2.2.3 Voltages under fault conditions test
2.4 Limited current circuits test
2.5 Limited power sources test
2.9.2 Humidity conditioning test
2.10.2 Determination of working voltage test
2.10.3, 2.10.4 Clearances and creepage distances measurements
2.10.5 Distance through insulation measurements
4.2.2 Mechanical strength – steady force test, 10 N
4.2.4 Mechanical strength – steady force test, 250 N
4.2.6 Mechanical strength – drop test
4.2.7 Mechanical strength – stress relief test
4.3.6 Strain on socket-outlet test (for direct plug-in equipment)
4.5.1 Normal operating test
4.5.2 Ball pressure test
5.1 Touch current test
5.2 Electric strength test
5.3 Abnormal operating and fault conditions test
General product information:
Explanation of model designation of MU15-C******-**:
The 1
st
to 3
rd
“*” denotes the output voltage, which can be “033” (3.3 Vdc) to “240” (24 Vdc).
The 4
th
to 6
th
“*” denotes the output current, which can be “010” (0.1 A) to “280” (2.8 A).
The 7
th
to 8
th
“*” denotes the type of plug, which can be “A1”, “A2”, “A3”, “A4”, “B2”, “C4” or “C5” (“A1”
comply with ANSI/UL 1310 and ANSI/UL 1681, “A2” comply with GB 1002-1996, “A3” comply with
AS/NZS 3112: 2004, “A4” comply with IRAM 2063, “B2” comply with BS 1363, “C4” comply with KSC
8305, and “C5” comply with EN 50075 and IEC 60884-1).
AS/NZS 3112: 2004, “A4” comply with IRAM 2063, “B2” comply with BS 1363, “C4” comply with KSC
8305, and “C5” comply with EN 50075 and IEC 60884-1).
Click on the first or last page to see other RADIAL MICRO (serv.man2) service manuals if exist.