Read JBL PULSE (serv.man6) EMC - CB Certificate online
Page 11 of 51
Report No. 241619
TRF No. IEC60950_1C
General product information:
The EUT is a Class III portable wireless speaker with rechargeable battery and light effects. The unit will
be connected to a certified power adapter, refer to list of critical components on table 1.5.1. Internal
enclosure is plastic material of V-0 grade and totally enclosed with screws. The top and bottom ring
covers are enclosed to internal enclosure with screws.
I/O ports: one Aux-in jack and one USB port used for charging battery pack within EUTonly
Load condition:
The EUT is a Class III portable wireless speaker with rechargeable battery and light effects. The unit will
be connected to a certified power adapter, refer to list of critical components on table 1.5.1. Internal
enclosure is plastic material of V-0 grade and totally enclosed with screws. The top and bottom ring
covers are enclosed to internal enclosure with screws.
I/O ports: one Aux-in jack and one USB port used for charging battery pack within EUTonly
Load condition:
By using 1kHz sine wave input through to measuring Max. and 1/8 Max. non-clipped level.
Normal operation with 1/8 non-clipped output power on speaker with 1kHz sine wave, LED module is
normal operated.
Normal operation with 1/8 non-clipped output power on speaker with 1kHz sine wave, LED module is
normal operated.
If not specified, Aux-in mode
used for test and the data in the report represent the worst case.
Maximum recommended ambient (Tmra): 35°C
Circuit characteristics: Secondary (SELV) circuit.
1.1.2 - Additional requirements:
1.1.2 - Additional requirements:
Exposure to extreme temperatures, excessive dust, moisture or vibration; to flammable gases; to
corrosive or explosive atmospheres:
This equipment is intended to operate in a "normal" environment (Offices and homes).
Electromedical equipment connected to the patient:
This equipment is not an electromedical equipment intended to be physically connected to a patient.
Equipment used in vehicles, ships or aircrafts, in tropical countries, or at elevations > 2000m:
This equipment is intended to operate in a "normal" environment (Offices and homes).
corrosive or explosive atmospheres:
This equipment is intended to operate in a "normal" environment (Offices and homes).
Electromedical equipment connected to the patient:
This equipment is not an electromedical equipment intended to be physically connected to a patient.
Equipment used in vehicles, ships or aircrafts, in tropical countries, or at elevations > 2000m:
This equipment is intended to operate in a "normal" environment (Offices and homes).
Abbreviations used in the report:
-
normal
conditions
N.C.
- single fault conditions
S.F.C
-
functional
insulation OP
-
basic
insulation
BI
-
double
insulation
DI
-
supplementary
insulation
SI
- between parts of opposite
polarity
BOP
-
reinforced
insulation
RI
Indicate used abbreviations (if any)
Click on the first or last page to see other PULSE (serv.man6) service manuals if exist.