Read JBL PSW-D110 (serv.man7) Technical Bulletin online
JBL Incorporated 250 Crossways Park Dr. Woodbury, New York 11797 (516) 496-3400
Service Bulletin
Service Bulletin JBL9902 Rev1 - May 1999
Repair rate does not apply
To:
All JBL Service Centers
Model: PSW-D110
Subject: Grille removal
When servicing the PSW-D110 subwoofer, care must be taken when removing the metal subwoofer
speaker grille. Removing the grille by grasping one grille edge and pulling it off with a hinge-like
action could result in broken grille pins.
To remove:
1) Place the subwoofer on a padded surface, with the grille facing upwards.
2) Grasp the grille with both hands in two of the opposite cut-outs between the grille and the
cabinet.
3) Pull up on the grille gently, rocking the grille frame back and forth, evenly on both sides, until the
grille is free of the cabinet.
Note:
For grille replacement, there are two versions of the grille.
Earlier version has a .220” (5.6mm) grille pin diameter.
JBL Part# 200510
Later version has a .410” (10.4mm) grille pin diameter.
JBL Part# 200511
In the case of a missing grille, where pin diameter cannot be measured: take approximate diameter from the
rubber grille cups in the subwoofer cabinet.
.
Display
