Read JBL ON STAGEII (serv.man18) EMC - CB Certificate online
- Page 41 of 52 -
www.nemko.com
Report No. 46974
TRF No.:IECEN60950_1B
IEC 60950-1 / EN 60950-1
Clause
Requirement – Test
Result – Remark
Verdict
exceed the maximum value stipulated by the
manufacturer
manufacturer
or
importer.
c) A licence in accordance with clause 1 is also
not required by persons who operate an X-ray
emission source on which the electron
acceleration voltage exceeds 20 kV if
1) the X-ray emission source has been granted
a type approval, and
2) it is adequately indicated on the X-ray
emission source that
i) X-rays are generated
ii) the device stipulated by the manufacturer or
importer guarantees that the maximum
permissible local dose rate in accordance with
the type approval is not exceeded, and
iii) the electron acceleration voltage must not
exceed the maximum value stipulated by the
manufacturer
not required by persons who operate an X-ray
emission source on which the electron
acceleration voltage exceeds 20 kV if
1) the X-ray emission source has been granted
a type approval, and
2) it is adequately indicated on the X-ray
emission source that
i) X-rays are generated
ii) the device stipulated by the manufacturer or
importer guarantees that the maximum
permissible local dose rate in accordance with
the type approval is not exceeded, and
iii) the electron acceleration voltage must not
exceed the maximum value stipulated by the
manufacturer
or
importer.
d) Furthermore, a licence in accordance with
clause 1 is also not required by persons who
operate X-ray emission sources on which the
electron acceleration voltage does not exceed
30 kV if
1) the X-rays are generated only by intrinsically
safe CRTs complying with Enclosure III, No. 6,
2) the values stipulated in accordance with
Enclosure III, No. 6.2 are limited by technical
measures and specified in the device, and
3) it is adequately indicated on the X-ray
emission source that the X-rays generated are
adequately screened by the intrinsically safe
CRT.
clause 1 is also not required by persons who
operate X-ray emission sources on which the
electron acceleration voltage does not exceed
30 kV if
1) the X-rays are generated only by intrinsically
safe CRTs complying with Enclosure III, No. 6,
2) the values stipulated in accordance with
Enclosure III, No. 6.2 are limited by technical
measures and specified in the device, and
3) it is adequately indicated on the X-ray
emission source that the X-rays generated are
adequately screened by the intrinsically safe
CRT.
Annex P
C: Replace the text of this annex by:
See annex ZA.
See annex ZA.
Considered. —
Annex Q
C: Replace the title of IEC 61032 by "Protection of persons and equipment by
enclosures – Probes for verification".
Add the following notes for the standards indicated:
enclosures – Probes for verification".
Add the following notes for the standards indicated:
—
Click on the first or last page to see other ON STAGEII (serv.man18) service manuals if exist.