Read JBL ON STAGEII (serv.man18) EMC - CB Certificate online
- Page 4 of 52 -
www.nemko.com
Report No. 46974
TRF No.:IECEN60950_1B
Summary of testing:
General
Normal load as described in Annex L or as
close as possible to the most severe
normal use.
Normal load as described in Annex L or as
close as possible to the most severe
normal use.
Normal operation is considered 1/8th of maximum
undistorted power. Non-clipping was determined using a 1
KHz sinusoidal signal input. For maximum normal
operation, 1/8th of the non-clipping amplitude was used with
a filtered pink noise input signal.
undistorted power. Non-clipping was determined using a 1
KHz sinusoidal signal input. For maximum normal
operation, 1/8th of the non-clipping amplitude was used with
a filtered pink noise input signal.
1.5, 2.5. 3.2 External Power Supply
The external power supply was not evaluated as part of this
report. An external power supply approved to IEC 60950
shall be provided. The external power supply output shall be
separately certified as limited power source, complying with
the national regulations of the countries in which the
appliance is to be sold.
report. An external power supply approved to IEC 60950
shall be provided. The external power supply output shall be
separately certified as limited power source, complying with
the national regulations of the countries in which the
appliance is to be sold.
1.7.2 Safety instructions, required markings
regarding use of a specified power supply
regarding use of a specified power supply
Class III Equipment with an enclosure made of HB-Material,
using a non-special connector for the DC input must have a
marking stating the manufacturer and model number of the
power supply to be used. Marking is provided.
using a non-special connector for the DC input must have a
marking stating the manufacturer and model number of the
power supply to be used. Marking is provided.
1.7.12 Language of safety
markings/instruction.
markings/instruction.
Instructions and equipment marking related to safety shall
be applied in a language, which is acceptable in the country
in which the equipment is to be sold.
be applied in a language, which is acceptable in the country
in which the equipment is to be sold.
List of attachments:
1) Country Deviations for Australia (6 pages), Canada (5 pages), China (1 page), Israel (1 page),
Japan (5 pages), Korea (1 page), Singapore (1 page), USA (5 pages).
Japan (5 pages), Korea (1 page), Singapore (1 page), USA (5 pages).
Click on the first or last page to see other ON STAGEII (serv.man18) service manuals if exist.