Read JBL ON STAGE III IIIP (serv.man2) EMC - CB Certificate online
<12014238 001 >
Page 8 of 77
IEC 60950-1 / EN 60950-1
Clause
Requirement – Test
Result – Remark
Verdict
TRF No.:IECEN60950_1B
TRF originator: SGS Fimko
1.7.7.2
Terminal for a.c. mains supply conductors
Direct plug-in equipment.
N/A
1.7.7.3
Terminals for d.c. mains supply conductors
No d.c. mains supply.
N/A
1.7.8
Controls and indicators
No safety related switches or
indicators.
indicators.
N/A
1.7.8.1
Identification, location and marking .....................:
N/A
1.7.8.2
Colours ...............................................................:
N/A
1.7.8.3
Symbols according to IEC 60417 .........................:
N/A
1.7.8.4
Markings using figures ........................................:
N/A
1.7.9
Isolation of multiple power sources .....................: Only one supply from the
mains.
N/A
1.7.10
IT power distribution systems
Only for Norway
P
1.7.11
Thermostats and other regulating devices
No such device.
N/A
1.7.12
Language(s) .........................................................: Installation instruction in
English and German.
Versions in other languages
have to be provided during the
corresponding national
approvals.
have to be provided during the
corresponding national
approvals.
1.7.13
Durability
The label was subjected to the
permanence of marking test.
The label was rubbed with cloth
soaked with water for 15 sec.
And then again for 15 sec. With
the cloth soaked with
petroleum spirit.
After this test there was no
damage to the label. The
marking on the label did not
fade. There was no curling nor
lifting of the label edge.
permanence of marking test.
The label was rubbed with cloth
soaked with water for 15 sec.
And then again for 15 sec. With
the cloth soaked with
petroleum spirit.
After this test there was no
damage to the label. The
marking on the label did not
fade. There was no curling nor
lifting of the label edge.
P
1.7.14
Removable parts
No removable part.
N/A
1.7.15
Replaceable batteries
No battery provided.
N/A
Language(s)..........................................................:
1.7.16
Operator access with a tool ..................................: No operator accessible area
that needs to be accessed by
the use of a tool.
the use of a tool.
N/A
1.7.17
Equipment for restricted access locations ............: Not limited for use in restricted
access locations.
N/A
2
PROTECTION FROM HAZARDS
P
2.1
Protection from electric shock and energy hazards
P
Click on the first or last page to see other ON STAGE III IIIP (serv.man2) service manuals if exist.