ON STAGE III IIIP (serv.man2) - JBL Audio EMC - CB Certificate (repair manual). Page 8

Read JBL ON STAGE III IIIP (serv.man2) EMC - CB Certificate online

 
 
<12014238 001 > 
 
 
Page 7 of 77 
 
IEC 60950-1 / EN 60950-1 
Clause 
Requirement – Test  
Result – Remark  
Verdict 
 
TRF No.:IECEN60950_1B 
 
TRF originator: SGS Fimko 
1.6.2 
Input current 
Highest load according to 
1.2.2.1 for this equipment is the 
operation with the max. 
specified DC-load.  
Results see appended table 
1.6.3 
Voltage limit of hand-held equipment 
Not hand-held equipment. 
N/A 
1.6.4 
Neutral conductor  
Class II equipment without earth 
connection. 
N/A 
 
1.7 
Marking and instructions 
1.7.1 
Power rating  
See below. 
 
Rated voltage(s) or voltage range(s) (V)  .............:  AC100-240V  
 
Symbol for nature of supply, for d.c. only .............:  Mains from AC source 
N/A 
 
Rated frequency or rated frequency range (Hz)  ..:  50/60Hz  
 
Rated current (mA or A)  ......................................:  0.7A 
 
Manufacturer’s name or trademark or identification 
mark .....................................................................: 
Not shown / trademark of DVE 
 
Type/model or type reference...............................:  DSA-20R-12 Fa xy 
 
Symbol for Class II equipment only  .....................:  Double square symbol 
provided. 
 
Other symbols ......................................................:  Additional symbols or marking 
does not give rise to 
misunderstanding. 
 
Certification marks ...............................................:  Refer to the copy of the label 
drawings for details. 
1.7.2 
Safety instructions 
"User's Manual" provided that 
contains information regarding 
the maximum ambient 
temperature.  
1.7.3 
Short duty cycles 
Equipment is designed for 
continuous operation. 
N/A 
1.7.4 
Supply voltage adjustment ...................................:  No voltage selector. 
N/A 
 
Methods and means of adjustment; reference to 
installation instructions .........................................: 
 
N/A 
1.7.5 
Power outlets on the equipment  ..........................:  No power outlets provided. 
N/A 
1.7.6 
Fuse identification (marking, special fusing 
characteristics, cross-reference)  .........................: 
Marking adjacent to fuse on 
PCB as: 
F1   T1AL 250VAC 
1.7.7 
Wiring terminals 
See below. 
N/A 
1.7.7.1 
Protective earthing and bonding terminals  ..........:  Class II equipment without earth 
connection. 
N/A 
Page of 78
Display

Click on the first or last page to see other ON STAGE III IIIP (serv.man2) service manuals if exist.