Read JBL ON STAGE 400P (serv.man4) EMC - CB Certificate online
- Page 8 of 53 -
Report
No.
100711
TRF No. IECEN60950_1C
General remarks:
The test results presented in this report relate only to the object tested.
This report shall not be reproduced, except in full, without the written approval of the Issuing testing laboratory.
"(See Enclosure #)" refers to additional information appended to the report.
"(See appended table)" refers to a table appended to the report.
This report shall not be reproduced, except in full, without the written approval of the Issuing testing laboratory.
"(See Enclosure #)" refers to additional information appended to the report.
"(See appended table)" refers to a table appended to the report.
Note: This TRF includes EN Group Differences together with National Differences and Special
National Conditions, if any. All Differences are located in the Appendix to the main body of this TRF.
National Conditions, if any. All Differences are located in the Appendix to the main body of this TRF.
Throughout this report a comma (point) is used as the decimal separator.
General product information:
The EUT is a computer stereo system powered by an external SELV source. The EUT is provided with an
Ipod connection, USB and an auxiliary audio input connection.
Maximum recommended ambient (Tmra): 40°C
Connection to the supply: Not connected to mains supply.
Ipod connection, USB and an auxiliary audio input connection.
Maximum recommended ambient (Tmra): 40°C
Connection to the supply: Not connected to mains supply.
Normal operation condition: Normal operation is considered 1/8th of maximum undistorted power and the
Ipod 5V charge output is fully loaded to its max output power (1.5W). Non-clipping was determined using a 1
KHz sinusoidal signal input. For maximum normal operation, 1/8th of the non-clipping amplitude was used
with a filtered pink noise input signal.
1.1.2 - Additional requirements:
Exposure to extreme temperatures, excessive dust, moisture or vibration; to flammable gases; to corrosive
or explosive atmospheres:
This equipment is intended to operate in a "normal" environment (Offices and homes).
Electromedical equipment connected to the patient:
This equipment is not an electromedical equipment intended to be physically connected to a patient.
Ipod 5V charge output is fully loaded to its max output power (1.5W). Non-clipping was determined using a 1
KHz sinusoidal signal input. For maximum normal operation, 1/8th of the non-clipping amplitude was used
with a filtered pink noise input signal.
1.1.2 - Additional requirements:
Exposure to extreme temperatures, excessive dust, moisture or vibration; to flammable gases; to corrosive
or explosive atmospheres:
This equipment is intended to operate in a "normal" environment (Offices and homes).
Electromedical equipment connected to the patient:
This equipment is not an electromedical equipment intended to be physically connected to a patient.
Equipment used in vehicles, ships or aircrafts, in tropical countries, or at elevations > 2000m:
This equipment is intended to operate in a "normal" environment (Offices and homes).
Click on the first or last page to see other ON STAGE 400P (serv.man4) service manuals if exist.