Read JBL ON STAGE 200ID EMC - CB Certificate online
- Page 5 of 63 -
Report
No.
98323
TRF No. IECEN60950_1C
General product information:
The equipment under tests is a Class III computer speaker system with two mains speakers of 4ohm
The equipment under tests is a Class III computer speaker system with two mains speakers of 4ohm
powered by a detachable Limited Power Source adaptor with a non-specialized type connector. The
computer
speaker system is considered as IT product.
Normal operating condition: Supplied 1KHz sine wave for speakers in computer speaker system and obtain
1/8 Maximum non-clipped output power, & charging Ipod (500mA 5V)
Circuit characteristics: The equipment contains secondary (SELV).
Maximum recommended ambient (Tmra): 40°C
Connection to the supply: No connection to mains.
1.1.2 - Additional requirements:
Exposure to extreme temperatures, excessive dust, moisture or vibration; to flammable gases; to corrosive
or explosive atmospheres:
This equipment is intended to operate in a "normal" environment (Offices and homes).
Electromedical equipment connected to the patient:
This equipment is not an electromedical equipment intended to be physically connected to a patient.
Equipment used in vehicles, ships or aircrafts, in tropical countries, or at elevations > 2000m:
This equipment is intended to operate in a "normal" environment (Offices and homes).
Normal operating condition: Supplied 1KHz sine wave for speakers in computer speaker system and obtain
1/8 Maximum non-clipped output power, & charging Ipod (500mA 5V)
Circuit characteristics: The equipment contains secondary (SELV).
Maximum recommended ambient (Tmra): 40°C
Connection to the supply: No connection to mains.
1.1.2 - Additional requirements:
Exposure to extreme temperatures, excessive dust, moisture or vibration; to flammable gases; to corrosive
or explosive atmospheres:
This equipment is intended to operate in a "normal" environment (Offices and homes).
Electromedical equipment connected to the patient:
This equipment is not an electromedical equipment intended to be physically connected to a patient.
Equipment used in vehicles, ships or aircrafts, in tropical countries, or at elevations > 2000m:
This equipment is intended to operate in a "normal" environment (Offices and homes).
The product has been tested according to standard IEC 60950-1:2005 (2
nd
Edition) / EN 60950-1:2006
and those deviations taken into account of
CENELEC common modifications
United Kingdom
Canadian
Singapore
Finland
Denmark
Ireland
Korean
Chinese
Sweden
Germany
Spain
US
Japanese
Norway
Switzerland
Australian
Israeli
Click on the first or last page to see other ON STAGE 200ID service manuals if exist.