Read JBL ON STAGE 200ID EMC - CB Certificate online
Test Report issued under the responsibility of
www.nemko.com
This Test Report , when bearing the Nemko name and logo is only valid when issued by a Nemko
laboratory, or by a laboratory having special agreement with Nemko.
laboratory, or by a laboratory having special agreement with Nemko.
TEST REPORT
IEC 60950-1: 2005 (2nd Edition) and/or EN 60950-1:2006
Information technology equipment – Safety –
Part 1: General requirements
Report Reference No
. ....................: 98323
Tested by (name + signature) ..........:
Kenny Ho
Witnessed by (name + signature) ....: N/A
Supervised by (name + signature) ...: N/A
Approved by (name + signature)......:
Sam-Geun Gwack
Date of issue ....................................: 26
February 2008
CB Testing Laboratory Name
.......: Nemko Hong Kong Ltd.
Phone: (+ 852) 2675 0288
Address ...........................................: Unit 3-5, 1/F , Festigood Centre, 8 Lok Yip Road, On Lok Tsuen,
Fanling, N.T., Hong Kong
Testing location / procedure.............: CBTL
RMT
SMT
WMT
TMP
Testing location / address ................: Same as above.
Applicant’s name
............................: Harman Multimedia
Test specification:
Standard...........................................: IEC
60950-1:2005 (2nd Edition) and/or EN 60950-1:2006
Test procedure .................................: CB/CCA
Non-standard test method…………..: N/A
Test Report Form No
......................: IECEN60950_1C
Test Report Form(s) Originator....................... :
SGS Fimko Ltd
Master TRF..................................................... :
2006-06
This publication may be reproduced in whole or in part for non-commercial purposes as long as the IECEE is
acknowledged as copyright owner and source of the material. IECEE takes no responsibility for and will not assume
liability for damages resulting from the reader's interpretation of the reproduced material due to its placement and
context.
acknowledged as copyright owner and source of the material. IECEE takes no responsibility for and will not assume
liability for damages resulting from the reader's interpretation of the reproduced material due to its placement and
context.
If this Test Report Form is used by non-IECEE members, the IECEE/IEC logo shall be removed
This report is not valid as a CB Test Report unless signed by an approved CB Testing Laboratory and
appended to a CB Test Certificate issued by an NCB in accordance with IECEE 02.
appended to a CB Test Certificate issued by an NCB in accordance with IECEE 02.
Click on the first or last page to see other ON STAGE 200ID service manuals if exist.