Read JBL ON STAGE 200ID (serv.man2) EMC - CB Certificate online
Ident. Nr.:
111931
Date:
2008-09-09
111931 EMC TRF_verified
page 19 of 50
6 Harmonic
current
6.1 Standard
Basic standard
EN 61000-3-2:2006
Date of testing
2008-09-02
6.2 Measurement equipment
Equipment
Last Calibration
Type
Serial No
.
Manufacturer
Power
February 20, 2008 5001ix-CTS-400
SB2588
CI
Three Phase Harmonic
flicker test system
flicker test system
February 20, 2008 PACS-3
SB2588/01 CI
Power
February 20, 2008 5001ix-CTS-400-NO SB2588/02 CI
Power
February 20, 2008 5001ix-CTS-400-NO SB2588/03 CI
6.3 Test set-up
See annexe B
See annexe B
6.4 Classification of EUT
Devices with an active input power
of P <75 W
of P <75 W
Balanced three-phase equipment and all other
equipment, expect that stated in one of the
following classes
equipment, expect that stated in one of the
following classes
Class A
Portable tools
Class B
Lightning equipment, including dimming devices
Class C
Equipment having an input current with a "special
wave shape" as defined in figure 1 in the
standard and an active input power, P
wave shape" as defined in figure 1 in the
standard and an active input power, P
≤ 600 W
and motor driven with phase angle control
Class D
The power cord of the EUT is connected to the output of the test systems , Turn on the power of the
EUT and use the test system to test the harmonic current level.Observation time: 150s
EUT and use the test system to test the harmonic current level.Observation time: 150s
If Harmonic current less than 0.6% of the input current measured under the test condition ,or less
than 5mA, then whichever is greater,are disregarded.
than 5mA, then whichever is greater,are disregarded.
Click on the first or last page to see other ON STAGE 200ID (serv.man2) service manuals if exist.