Read JBL ON BEAT XTREME (serv.man6) EMC - CB Certificate online
ELECTRONICS CO., LTD.
645, SUNGKOK-DONG, ANSAN-CITY, KYUNGKI-DO, KOREA, 425-110
FAX.: +82-345-490-2539 TEL.: +82-345-490-2283
EMI TEST REPORT
Reference No. 54121104E
Emission of Electromagnetic Disturbances
Equipment Under Test
Equipment
: iPad speaker docking system with Bluetooth
Type/Model
: JBL® OnBeat Xtreme™
Brand Name : JBL
Manufacturer : DongGuan LiaoBu Anam Electronics
Total page of this report: 17(including this page)
SUMMARY
Referring to the performance criteria and the operation mode during the test specified in
this report the equipment does comply with the requirements according to EN
55013(2001)&+A1(2003)&+A2(2006). The test results in this report apply only to the
sample(s) tested.
this report the equipment does comply with the requirements according to EN
55013(2001)&+A1(2003)&+A2(2006). The test results in this report apply only to the
sample(s) tested.
Report Issued : April 29, 2011
EUT Received : April 19, 2011
Tested by: Approved by:
B. S. Lee/ Researching Engineer
T. Y. Kim / General Manager
“This report should not be reproduced except in full without the written approval of the testing
laboratory.”
Reference No. : 54121104E Page 2/17
◀ Anam EMC Test Laboratory ▶
CONTENTS
Page
1. Client Information
4
2. Equipment under test (EUT)
4
2.1. Identification of the EUT
2.2. Additional information about the EUT
2.2. Additional information about the EUT
3. Test specifications
5
3.1. Standard
3.2. Additions, Deviations and Exclusions from standard
3.3. Purpose of the test
3.4. Mode of operation during the test
3.2. Additions, Deviations and Exclusions from standard
3.3. Purpose of the test
3.4. Mode of operation during the test
4. Test summary
5
5. Mains terminal disturbance voltage
6
5.1. Operating environment
5.2. Test set-up and procedure
5.3. Measurement uncertainty
5.4. Test instrumentation
5.5. Test protocol
5.2. Test set-up and procedure
5.3. Measurement uncertainty
5.4. Test instrumentation
5.5. Test protocol
6. Disturbance Power
7
6.1. Operating environment
6.2. Test set-up and procedure
6.3. Measurement uncertainty
6.4. Test instrumentation
6.5. Test protocol
6.2. Test set-up and procedure
6.3. Measurement uncertainty
6.4. Test instrumentation
6.5. Test protocol
7. Photograph of Product
9
8. Photograph of the test set-up
11
Annex - Measurement data;
Annex A : Mains terminal disturbance voltage (2 Copies)
12
Annex B : Disturbance Power (4 Copies)
14
Reference No. : 54121104E Page 3/17
◀ Anam EMC Test Laboratory ▶
1. CLIENT INFORMATION
The EUT has been tested by request of:
* Company
: Harman Consumer Group
* Contact Person
:
Mr. Tim Huang (Sr Compliance Engineer)
Mr. Aaron Butters
* Tel.
:
+86 755 8634 3778 / +1 818 895 3312
2. EQUIPMENT UNDER TEST (EUT)
2.1. Identification of the EUT
*Equipment
iPad speaker docking system with Bluetooth
*Model No.
JBL® OnBeat Xtreme™
*Brand Name
JBL
*Serial No.
N/A
*Manufacturer
(China)
(China)
DongGuan LiaoBu Anam Electronics
Xin Cheng Management Area, Liaobu Town,
Dongguan City, Guang Dong Province, China
Fax: 86-769-3216338 Tel: 86-769-3326888
Xin Cheng Management Area, Liaobu Town,
Dongguan City, Guang Dong Province, China
Fax: 86-769-3216338 Tel: 86-769-3326888
*Power Rating
AC 100-240V~, 50/60Hz, 35W
*Tuner Section
N/A
*External signal
In/Out terminal
AUX
VIDEO
USB
2.2. Additional Information about the EUT
The EUT consists of the following Subsystems/Modules/Parts: N/A
The test have been performed on the EUT provided with the following
modifications : None.
Reference No. : 54121104E Page 4/17
◀ Anam EMC Test Laboratory ▶
3. TEST SPECIFICATIONS
3.1. Standards
*EN55013 (2001)&A1(2003)+A2(2006) :
Sound and Television broadcast receivers and Associated equipment
-Radio Disturbance characteristics - Limits and methods of measurement.
-Radio Disturbance characteristics - Limits and methods of measurement.
3.2. Additions, deviations and exclusions from standard
No additions, deviations or exclusions have been made from standard.
3.3. Purpose of the test:
To determine whether the EUT fulfils the EMC-emission requirements of the
Standards stated in section 3.1.
3.4. Mode of operation during the test
The EUT was operated in such a way as to deliver one-eighth on the non-clipped
output power to the rated load impedance using the sinusoidal of 1 ㎑ & color-
bar.
The EUT was set to the mode of Tuner.
4. TEST SUMMARY
The results in this report apply only to sample(s) tested:
Test item
Passed
the test
Note
Mains terminal disturbance voltage
Yes
Disturbance Radiation
N/A
Antenna Terminal Disturbance Voltage
N/A
Disturbance Power
Yes
The equipment does comply with the requirements.
For the measurement data, see Annex.