Read JBL ON BEAT RUMBLE EMC - CB Certificate online
Issue Date:
2013-01-09
Page 13 of 54
Report Reference #
E204594-A39-CB-1
IEC 60950-1
Clause
Requirement + Test
Result - Remark
Verdict
TRF No. : IEC60950_1B
This report issued under the responsibility of UL
2
PROTECTION FROM HAZARDS
Pass
2.1
Protection from electric shock and energy hazards
N/A
2.1.1
Protection in operator access areas
Unit supplied by SELV, and no
hazardous voltage generated
within unit.
hazardous voltage generated
within unit.
N/A
2.1.1.1
Access to energized parts
Unit supplied by SELV, and no
hazardous voltage generated
within unit.
hazardous voltage generated
within unit.
N/A
Test by inspection .................................... :
N/A
Test with test finger (Figure 2A) ............... :
N/A
Test with test pin (Figure 2B) ................... :
N/A
Test with test probe (Figure 2C) ............... :
No TNV present.
N/A
2.1.1.2
Battery compartments
N/A
2.1.1.3
Access to ELV wiring
N/A
Working voltage (Vpeak or Vrms);
minimum distance through insulation (mm)
................................................................. :
minimum distance through insulation (mm)
................................................................. :
-
2.1.1.4
Access to hazardous voltage circuit wiring
N/A
2.1.1.5
Energy hazards ........................................ :
No operator access to
hazardous energy.
hazardous energy.
N/A
2.1.1.6
Manual controls
N/A
2.1.1.7
Discharge of capacitors in equipment
N/A
Measured voltage (V); time-constant (s) .. :
-
2.1.1.8
Energy hazards - d.c. mains supply
N/A
a) Capacitor connected to the d.c. mains
supply ....................................................... :
supply ....................................................... :
N/A
N/A
2.1.1.9
Audio amplifiers ........................................ :
N/A
2.1.2
Protection in service access areas
N/A
2.1.3
Protection in restricted access locations
N/A
Click on the first or last page to see other ON BEAT RUMBLE service manuals if exist.