Read JBL ON BEAT RUMBLE (serv.man4) EMC - CB Certificate online
Report No.: EM201200813-4
Application No.:
ZJ00024740
Page 8 of 53
4.
RADIO TECHNICAL REQUIREMENTS SPECIFICATION IN EN 300
328
4.1 MAXIMUM TRANSMIT POWER
4.1.1 LIMITS
Frequency
EN300 328 clause 4.3.1
2400MHz~2483.5 MHz
20 dBm (i.e. 100mW)
4.1.2 TEST PROCEDURE
Test requirement:
EN 300 328 clause 4.3.1
Test Method:
EN 300 328 clause 5.7.2.2
EUT Operation:
Fixed Frequency
Status:
Keep EUT on transmitting mode by the software provided by
manufacturer.
manufacturer.
Test channel:
Lowest channel: (2402MHz)
Middle channel: (2441MHz),
Highest channel: (2480MHz)
Middle channel: (2441MHz),
Highest channel: (2480MHz)
Test condition:
Normal and extreme test conditions.
Equipment Used:
Refer to section 3.4
Test Procedure:
As annex C1 of standard EN 300328
Remark: Pre-test the 3 modulation to find GFSK and 8DPSK is worse case, so only record
GFSK and 8DPSK test data.
4.1.3 TEST SETUP
Antenna
EUT
Receiver
Click on the first or last page to see other ON BEAT RUMBLE (serv.man4) service manuals if exist.