Read JBL ON BEAT MINI EMC - CB Certificate online
Page 10 of 44
Report No. : W13-950-006
IEC
60950-1
Clause
Requirement + Test
Result - Remark
Verdict
TRF No. IEC60950_1C
Korea Testing Certification
2.1.1
Protection in operator access areas
No hazardous parts in
operator access areas.
operator access areas.
P
2.1.1.1
Access to energized parts
P
Test by inspection .................................................. :
Cannot touch live part or
basic insulation
basic insulation
P
Test with test finger (Figure 2A) ............................ :
N/A
Test with test pin (Figure 2B) ................................ :
N/A
Test with test probe (Figure 2C) ............................ :
N/A
2.1.1.2
Battery compartments
No such battery
compartments.
compartments.
N/A
2.1.1.3
Access to ELV wiring
No internal wiring at ELV
accessible to the operator.
accessible to the operator.
N/A
Working voltage (Vpeak or Vrms); minimum
distance through insulation (mm)
distance through insulation (mm)
2.1.1.4
Access to hazardous voltage circuit wiring
No such accessible
hazardous voltage circuit
wiring
hazardous voltage circuit
wiring
N/A
2.1.1.5
Energy hazards
........................................... :
No accessible energy
hazards
hazards
N/A
2.1.1.6
Manual controls
No such controls
N/A
2.1.1.7
Discharge of capacitors in equipment
N/A
Measured voltage (V); time-constant (s) ................ :
2.1.1.8
Energy hazards – d.c. mains supply
Not connected to d.c mains
supply
supply
N/A
a) Capacitor connected to the d.c. mains supply .. :
N/A
N/A
2.1.1.9 Audio
amplifiers ..................................................... :
See Cl. 2.1.1.1
P
2.1.2
Protection in service access areas
No such service access areas
N/A
2.1.3
Protection in restricted access locations
No such restricted access
locations
locations
N/A
2.2 SELV
circuits
P
2.2.1
General requirements
Class III equipment (supplied
by SELV).
P
2.2.2
Voltages under normal conditions (V) ................... :
< 60V d.c. or <42.4Vpk.
P
2.2.3
Voltages under fault conditions (V) ....................... :
< 60V d.c. or <42.4Vpk
P
2.2.4
Connection of SELV circuits to other circuits ...... :
Connect to SELV circuit only
P
Click on the first or last page to see other ON BEAT MINI service manuals if exist.