Read JBL ON BEAT MICRO Service Manual online
Multimedia Tech Sheet
Unit:
JBL OnBeat MICRO
Status, service center:
Set exchange, accessory change
Status, distributor:
Set exchange, repairable, accessory change
Date:
2013
. Rev 2 08/2015
PARTS
ASSY-MAIN BOARD
08-NM052U-MA1
ASSY-INPUT BOARD
08-NM052U-CN1
ASSY-IN BOARD (iphone 5 conn) 08-NM052U-IN1
ASSY-IRON GRILLE(WHITE)
ASSY-IRON GRILLE(WHITE)
08-HMICRO-006
ASSY-IRON GRILLE(BLACK)
08-HMICRO-001
ASSY-TOP COVER(WHITE)
08-HMICRO-007
ASSY-TOP COVER (BLACK)
08-HMICRO-002
ASSY-BOTTOM COVER (black)
08-HMICRO-004
ASSY-BATTERY COVER(WHITE)
08-HMICRO-010
ASSY-BATTERY COVER (BLACK)
08-HMICRO-005
SPEAKER
42-025003-04001
IPHONE CAP
56-HMICW7-0HA
RUBBER BACK WHITE
59-125970-000B2
RUBBER BACK BLACK
59-125970-000B1
QSG
72-BEATMC-QSGB3
Power adapters:
White part # 81-ADT063-333GC-M
Black part # 81-ADT063-332GC-M
No.
Description
Part Number
Remarks
1
Logo
2
Iron Grille(black)
ASSY-IRON GRILLE
08-HMICRO-001
(
)
3
Top Cover(black)
6
Rubber Seat(black)
7
Key-Press
8
Guide Light Lens
11
Iphone5 Bracket
12
Poron Pad
13
Spring
ASSY-TOP COVER
08-HMICRO-002
13
Spring
16
Docking Cap
4
Speaker
42-025003-04001
5
Rubber Back(black)
59-125970-000B1
9
Guide Sound Tube(black)
10
Guide Sound Tube(black)
14
Iphone5 Lightning Connector
47-IPD003-XX0
15
IPh
5 C
56 HMICW7 0HA
ASSY-SOUND GUIDE TUBE
08-HMICRO-003
15
IPhone5 Cap
56-HMICW7-0HA
17
Main Board
08-NM052U-MA1
19
Input Board
08-NM052U-CN1
18
Connect Anode and Cathode Plate
20
Anode Plate
21
Cathode Plate
22
Bottom Cover(black)
ASSY-BOTTOM COVER
08-HMICRO-004
23
Battery Door
24
Rubber Pad
ASSY-BATTERY COVER
08-HMICRO-005
Exploded View For JBL Onbeat Micro:
February 2013
JBL OnBeat Micro
Software upgrade instructions
The version of this upgrade is: V0.7.7
This upgrade improves the auto-standby functionality.
Before you upgrade:
1. You may check the present software version by docking an iPhone, selecting “General” followed
by “About” followed by “JBL OnBeat Micro”. Now you can see the firmware version.
2. Unzip the file that you have downloaded from the JBL web site onto an empty FAT32 formatted
USB stick. File name on the USB stick: “image.hex”
3. Disconnect the power supply cable from the OnBeat Micro.
4. Remove the batteries from the OnBeat Micro. This is shown in the owner’s manual.
4. Remove the batteries from the OnBeat Micro. This is shown in the owner’s manual.
How to upgrade:
1. Press and hold down both the Power and the Volume Up buttons.
2. Insert the power supply cable back into the OnBeat Micro while still holding Power and Vol.
3. Check that the Power LED flashes white and amber. When it does, release both buttons.
4. Insert the USB stick into the rear panel USB port. Wait about one minute until upgrading has
2. Insert the power supply cable back into the OnBeat Micro while still holding Power and Vol.
3. Check that the Power LED flashes white and amber. When it does, release both buttons.
4. Insert the USB stick into the rear panel USB port. Wait about one minute until upgrading has
finished.
5. You can see that the process has finished when the Power LED turns OFF.
6. The OnBeat Micro has now switched itself OFF, and is ready for use.
6. The OnBeat Micro has now switched itself OFF, and is ready for use.
Note: Do not press any buttons or interrupt the power supply during the upgrading process, otherwise
the player may become defective.
