Read JBL MX 150 (serv.man2) Service Manual online
6
Standby: This button's function depends on the MS 150's on/Standby state:
When the
•
MS 150 is on, pressing this button powers it down to the Standby mode
(power is available only to the clock and alarm functions).
When the
When the
•
MS 150 is in the Standby mode, pressing this button toggles the display
brightness between normal and dim. When you turn the MS 150 on, the display
brightness will be at the new setting.
Power On: Press this button to turn the MS 150 on.
Skip/Scan Forward/Reverse: These buttons’ functions depend on which source has been
Skip/Scan Forward/Reverse: These buttons’ functions depend on which source has been
selected:
•
iPod/iPhone or CD: Press and release a button to skip to the next track or to the
beginning of the current track. Press the reverse button twice to skip to the previous
track. Press and hold a button to scan forward or in reverse within a track.
•
FM Radio: See Tuning on this page.
Play/Pause/Memory: This button’s function depends on which source has been
selected:
•
iPod/iPhone or CD: Each press of the button toggles between the Play and Pause
functions. Press and hold the button to stop playback fully.
•
FM Radio: If the currently tuned station has not been programmed into a preset,
pressing the button stores the station as a preset. If all of the preset positions have
been used, the “Full” message will appear, and you must erase an old preset before a
new one can be stored. If the currently tuned station has previously been programmed
as a preset, pressing the button for two seconds will erase the preset.
Source Select: This button’s function depends on the MS 150’s on/Standby state:
When the MS 150 is on, each press of the button changes the current source in this
•
order: FM, CD, AUX LINE IN 1 (rear-panel 3.5mm analog input), AUX LINE IN 2 (front
panel), AUX LINE IN 3 (rear-panel dual RCA jacks), AUX DIGITAL IN, iPod/iPhone.
When the MS 150 is in Standby mode, the SETTINGS menu is displayed in the Message
When the MS 150 is in Standby mode, the SETTINGS menu is displayed in the Message
•
Display. Use the / buttons to toggle between the ALARM VOLUME and EQ
options. Use the / buttons within each option to change the setting. Press the
Source button again to save your selection.
Tuning Mode: When FM Radio is the selected source, each press of the button toggles
between Auto and Manual tuning.
Playback Mode: When iPod/iPhone or CD is the selected source, each press changes the
Playback Mode: When iPod/iPhone or CD is the selected source, each press changes the
repeat and random (shuffle) playback mode. See page 9 for the modes available with each
source. When the MS 150 in the Standby mode or when the source is changed, the playback
mode returns to Normal.
Sleep: Each press increases the time until turn-off from 10 to 90 minutes, in increments of
Sleep: Each press increases the time until turn-off from 10 to 90 minutes, in increments of
10 minutes. The next press after the 90 minutes setting turns off the Sleep function.
Clock Adjust Mode: With the MS 150 in the Standby mode, press this button to adjust the
clock. Use the / Navigation buttons to adjust the hour, minute and 12/24 settings.
To change between AM and PM, increase or decrease the hour. Press the / buttons to
move the cursor to the previous or next position. Press this button again at any time when
finished.
Alarm Adjust Mode: With the MS 150 in Standby mode, press this button to adjust the
Alarm Adjust Mode: With the MS 150 in Standby mode, press this button to adjust the
alarm. Use the / Navigation buttons to adjust the hour, minute, 12/24 and wake-up
source settings. To change between AM and PM, increase or decrease the hour. Press the
/ buttons to move the cursor to the previous or next position. Press this button again
at any time when finished.
Preset Search: When FM radio is the selected source, press this button to select the next or
Preset Search: When FM radio is the selected source, press this button to select the next or
previous preset station, if any have been programmed.
Eject: When a CD is loaded, press this button to eject it.
Tuning: When FM radio is the selected source, press and release this button to tune to
Eject: When a CD is loaded, press this button to eject it.
Tuning: When FM radio is the selected source, press and release this button to tune to
the next higher or lower station by one frequency increment. Press and hold this button
to scan quickly through the stations. When you release the button, if Auto tuning mode is
active, the radio continues to scan until it finds a station of acceptably strong signal quality,
and then it stops. In Manual tuning mode, the radio stops immediately at the current
frequency.
/// Navigation buttons: These buttons are used with an iPod/iPhone to navigate
its menus, or in Standby mode to adjust the clock or alarm. The / buttons are used for
scrolling. Press the button to select the current item, and the button to display the
menu or return to the previous menu screen.
Mute: Press this button to silence the speakers temporarily. Press the button again to
Mute: Press this button to silence the speakers temporarily. Press the button again to
restore audio. Powering down the MS 150 to the Standby mode cancels the muting.
Volume Controls: Momentarily press these buttons to increase or decrease the volume.
Volume Controls: Momentarily press these buttons to increase or decrease the volume.
Press and hold either button to change the volume more quickly.
MS 150
Remote Control Functions
///Navigation
Standby
Play/Pause/Memory
Tuning Mode
Source Select
Sleep
Preset Search
Volume Controls
Power On
Playback Mode
Alarm Adjust Mode
Eject
Eject
Tuning
Mute
Skip/Scan/Forward/
Reverse
Clock Adjust Mode
NOTE: To completely power the MS 150 off, unplug the power supply from the AC
outlet.
MS 150
0291CSK - HK MS150 OM v6.indd 6
07/06/11 10:41:09
JBL
MX 150/230V Service Manual
Page 7 of 64
Click on the first or last page to see other MX 150 (serv.man2) service manuals if exist.