MEDIA SYSTEM 3000 - JBL Audio User Guide / Operation Manual. Page 9

-9-

Bass

Treble

Delay

Level

0 dB

Test

Adjustment

Late Night

Power

Mute

Surround 

Mode

Input

Volume

Media 3000

Volume

Surround Mode

Input

Mute

STANDBY

ON

SUB

LVL

DLY

RS

RF

C

LF

LS

AUX

PCM

3 - St

Late Night

Phantom

Digital

5.1 Ch

ProLogic

Surround

DIG. OPT

DIG. COAX

TV

Front Panel

Remote Control

1. Power
This button, located only on the
remote control, allows the user to
manually turn on or off the Media
3000. Please note that the Media
3000 features Automatic Turn-
On/Off, and the power switch is
not normally used unless it is
necessary to override this
automatic feature, or in case the
analog input to be used is not the
last one that was used and so
Automatic Turn-On is not
available for that input. Please
read the details regarding
Automatic Turn-On/Off on page 3

of this manual, and keep in mind
that if the Media 3000 is shut
down using this power button, its
automatic turn on feature will
remain disabled for five minutes
after the source connected to the
Media 3000 is shut down also.
This is to prevent the Media 3000
from repeatedly turning itself
back on despite the user’s wishes.
The Media 3000 can also be
powered on by using the Input
button (4) on the front panel of
the subwoofer or on the remote
control. Please note that if input
selection is done by pressing the
Input button, the Automatic
Digital Input Selection of the
Media 3000 will be disabled until
the Media 3000 shuts down. 

When the Media 3000 is plugged
into a working electrical outlet
and its master switch on the back
panel is set to On/Standby, the
Standby (32) indicator will
illuminate. The ON (31) indicator
will light as soon as the Media
3000 is turned on either
automatically or via the pressing
of the Power or Input buttons.

2. Mute
From either the front panel or the
remote control, press (Mute) to
lower the volume completely. The
mute symbol indicator (33) will
illuminate. When you press either
of the mute buttons again, the
volume will return to its previous
setting.
Note: The mute function can also
be turned off by pressing either of
the volume buttons on the front
panel or the remote control.

3. Late Night 
This feature is available for Dolby
Digital only. It compresses the
inherently dynamic digital sound
so that the quiet and loud
passages are not quite as
different in sound levels as they
ordinarily are. This feature allows
the user to watch movies and
listen to dialogue at toned-down
levels so as not to disturb others
with the loud sound effects that
may be present. The Late Night
indicator (26) illuminates when
this feature is active.