Read JBL HTPS 400 (serv.man2) User Guide / Operation Manual online
4
5
H O O K U P
Line-Level Inputs
Subwoofer
Out
THX® Certified
Receiver/Processor
OFF
AUTO
ON
OUT
IN
0
°
THX
180
°
NORMAL
MIN. MAX.
50Hz 150Hz
GREEN–ON
RED–STANDBY
LINE
PHASE
GAIN
CROSSOVER
EQ
THX Mode:
If your surround processor/
receiver is THX-certified:
If your surround processor/
receiver is THX-certified:
Note:
When the THX/Normal
switch is set to “THX,” the
subwoofer’s internal crossover
and output level control are
bypassed.
subwoofer’s internal crossover
and output level control are
bypassed.
Subwoofer
Out
OFF
AUTO
ON
OUT
IN
0
°
THX
180
°
NORMAL
MIN. MAX.
50Hz 150Hz
GREEN–ON
RED–STANDBY
LINE
PHASE
GAIN
CROSSOVER
EQ
OFF
AUTO
ON
OUT
IN
0
°
THX
180
°
NORMAL
MIN. MAX.
50Hz 150Hz
GREEN–ON
RED–STANDBY
LINE
PHASE
GAIN
CROSSOVER
EQ
THX® Certified
Receiver/Processor
Sub 1
Sub 2
To continue enjoying THX-
quality bass response in a
very large room, two or more
HTPS-400 subwoofers may be
connected in series. For every
3000 cu. ft. of room volume, it
is recommended that you add
one HTPS-400.
quality bass response in a
very large room, two or more
HTPS-400 subwoofers may be
connected in series. For every
3000 cu. ft. of room volume, it
is recommended that you add
one HTPS-400.
Normal Mode:
Use this hookup for all non-
THX processors, including
Dolby* Digital, DTS
Use this hookup for all non-
THX processors, including
Dolby* Digital, DTS
®
, Dolby
Pro Logic* or stereo.
Note:
If using Dolby Digital or
DTS, set the crossover
frequency knob fully clockwise
to the maximum position. Make
sure the THX/Normal switch is
in the Normal position.
.
frequency knob fully clockwise
to the maximum position. Make
sure the THX/Normal switch is
in the Normal position.
.
Subwoofer
Out
Receiver/Amplifier
OFF
AUTO
ON
OUT
IN
0
°
THX
180
°
NORMAL
MIN. MAX.
50Hz 150Hz
GREEN–ON
RED–STANDBY
LINE
PHASE
GAIN
CROSSOVER
EQ
Note:
Some receivers/
processors have stereo
subwoofer outputs. In that
case, you must use a “Y”-
connector (not included) in
order to maximize the
subwoofer’s performance.
subwoofer outputs. In that
case, you must use a “Y”-
connector (not included) in
order to maximize the
subwoofer’s performance.
Click on the first or last page to see other HTPS 400 (serv.man2) service manuals if exist.