Read JBL HTI 8 (serv.man4) User Guide / Operation Manual online
5
HTI6, HTI8
E X I S T I N G C O N S T R U C T I O N
Remove the grille from the
speaker frame.
speaker frame.
Determine the correct
speaker location.
speaker location.
Template
Level
Note: Always allow at least
one-half inch between a wall
stud and the speaker cutout or
the locking tabs will not be able
to swivel into place.
one-half inch between a wall
stud and the speaker cutout or
the locking tabs will not be able
to swivel into place.
≥
1/2"
≥
1/2"
≥
1/2"
Cut the dry wall.
Connect the speaker wires
to the speaker.
to the speaker.
Replace the metal grille.
Place the frame assembly
in the wall.
in the wall.
Screw down each of the four
Phillips head screws. The
locking tabs will swivel into
place and secure the unit to
the rear surface of the drywall.
Phillips head screws. The
locking tabs will swivel into
place and secure the unit to
the rear surface of the drywall.
Click on the first or last page to see other HTI 8 (serv.man4) service manuals if exist.