HLS 820 - JBL Audio Technical Bulletin (repair manual)

hls 820 technical bulletin
Model
HLS 820
Pages
1 Few pages! See other manuals at the bottom of the first or last page.
Size
7.71 KB
Type
PDF
Document
Technical Bulletin
Brand
Device
Audio
File
hls-820.pdf
Date

Read JBL HLS 820 Technical Bulletin online

                Service Bulletin
Service Bulletin JBL9703 - May 1997
To: All JBL Service Centers, Dealers, Consumers
Models: HLS Center, HLS610, HLS810, HLS615, HLS620, HLS820
Subject: Removing and replacing HLS Series drivers
JBL HLS speaker systems have uniquely designed drivers which require special care when
removing them for service. Please follow these guidelines when removing/replacing loudspeaker
components.
Woofer Removal and Replacement
The mounting screws which hold the woofer in place are hidden behind the outer edge of the
woofer’s rubber surround.  They can be easily accessed and removed by gently lifting the
surround’s “flap” to expose each screw.  After all 4 screws are removed, the woofer may still be
held in place by the putty like material on the back of the woofer’s frame.  DO NOT use the flaps
to pull the woofer out.  Loosen the woofer by carefully placing a small flat blade screwdriver in
one of the mounting screw holes and use it to gently pry the woofer up.
After lifting the woofer out of the cabinet, the polarized lead wires can then be removed and
installed on the replacement woofer. Reinstall the woofer by lining up it’s 4 mounting screw holes
with those in the enclosure and gently drop the woofer into place. Carefully lift each flap and
reinstall the 4 mounting screws.
Tweeter Removal and Replacement
The tweeter is mounted to the back of the horn with a unique bayonet mounting system that
snaps into place. Because the horn is permanently attached to the enclosure, it is necessary to
remove the woofer to gain access to the tweeter.
After removing the woofer (see above), reach into the woofer hole and twist the tweeter element
slightly to the left. Remove the tweeter from the back of the horn, disconnect the polarized wires
and reinstall them on the replacement tweeter. Center the replacement tweeter onto the back of
the horn and twist it slightly to the right until it snaps into place. Replace woofer.
Display

Download JBL HLS 820 Technical Bulletin

Here you can read online and download JBL HLS 820 Technical Bulletin in PDF. HLS 820 technical bulletin will guide through the process and help you recover, restore, fix, disassemble and repair JBL HLS 820 Audio. Information contained in service manuals typically includes schematics / circuit diagrams, wiring diagrams, block diagrams, printed wiring boards, exploded views, parts list, disassembly / assembly, pcb.