Read JBL FLIP 3 (serv.man2) Service Manual online
Technical Specifications
1 Audio Section
1.1.1 Speaker Output
Description
Specification
Rated Output Power
2 x 8W +-10% (Measure before power limiter at 1% THD).
Please refer to Acoustic Design Specification.
Please refer to Acoustic Design Specification.
Input Sensitivity
Aux : 370mV +/- 10%
Wireless input:-9dBfs +/-1dB
Wireless input:-9dBfs +/-1dB
Input Overload
Aux : 1V rms
BT: 0dBFS
BT: 0dBFS
Auto Turn On Input Sensitivity
@1KHz, Typical : 2mV Limit : 4mV
@100Hz Typical : 10mV Limit :15mV
@100Hz Typical : 10mV Limit :15mV
Frequency Response (Output Power)
Aux_in : 40Hz to 20KHz +/- 1dB (EQ setting is disable)
BT: 20Hz to 19KHz +/- 1dB (EQ setting is disable)
BT: 20Hz to 19KHz +/- 1dB (EQ setting is disable)
Frequency Response (Output Power) with
EQ setting
EQ setting
TBC
THD+N at 1W
<0.5%@100hz/7khz, else<0.3%
THD+N at Rated Output Power
<1%
Signal-to-Noise ratio at Rated Output Power 80dB (A-Weighted)
Channel Separation
45dB @100Hz
50dB @1KHz
45dB @10KHz
50dB @1KHz
45dB @10KHz
Channel Crosstalk
80dB @100Hz
75dB @1KHz
70dB @10KHz
75dB @1KHz
70dB @10KHz
Inter Channel Gain Difference
<0.5dB
Residual Noise
80nW
2-1
Click on the first or last page to see other FLIP 3 (serv.man2) service manuals if exist.