Read JBL ESC 333 Sub (serv.man9) User Guide / Operation Manual online
-14-
If there is no sound from
any of the speakers:
any of the speakers:
• Make sure the subwoofer is
plugged into an active AC
wall outlet.
• Make sure the Master Power
Switch, located on the rear of
the subwoofer, is in the
On/Standby position.
• Make sure there is a
source – for example, a DVD
Player, CD Player, VCR or
television – hooked up to one
of the four input jacks.
• Make sure that the program
material is playing.
• Recheck the hookup
connections, referring to the
Speaker Connections section.
plugged into an active AC
wall outlet.
• Make sure the Master Power
Switch, located on the rear of
the subwoofer, is in the
On/Standby position.
• Make sure there is a
source – for example, a DVD
Player, CD Player, VCR or
television – hooked up to one
of the four input jacks.
• Make sure that the program
material is playing.
• Recheck the hookup
connections, referring to the
Speaker Connections section.
If there is no sound from
the surround speakers or
sound is very low:
the surround speakers or
sound is very low:
• Check all connections
between processor/amplifier
and each of the speakers.
• Raise the surround volume
from the remote control (see
Operation section).
• Make sure the TV show or
movie you are watching is
recorded in Dolby Digital or
Pro Logic Surround. If it is
not, try the Phantom or
Simulated Surround mode.
• Increase the surround-
speakers’ level, using the
level-adjustment instructions
found earlier in this manual.
between processor/amplifier
and each of the speakers.
• Raise the surround volume
from the remote control (see
Operation section).
• Make sure the TV show or
movie you are watching is
recorded in Dolby Digital or
Pro Logic Surround. If it is
not, try the Phantom or
Simulated Surround mode.
• Increase the surround-
speakers’ level, using the
level-adjustment instructions
found earlier in this manual.
If there is no sound from
the center speaker:
the center speaker:
• Make sure that the processor
is in the Surround or
3-Stereo mode. If it is in
Phantom or Stereo mode, the
center speaker will not play.
• Increase the level of the
center channel, using the
level-adjustment instructions
earlier in this manual.
• Check the connections
between the subwoofer and
the center speaker.
is in the Surround or
3-Stereo mode. If it is in
Phantom or Stereo mode, the
center speaker will not play.
• Increase the level of the
center channel, using the
level-adjustment instructions
earlier in this manual.
• Check the connections
between the subwoofer and
the center speaker.
If you have low bass output:
• Experiment with placement
of the subwoofer. Remember,
place the subwoofer in a
corner to get maximum bass
output from the system.
• Increase the subwoofer
level, using the level-
adjustment instructions
found earlier in this manual.
• Increase the level of bass,
using the remote control.
of the subwoofer. Remember,
place the subwoofer in a
corner to get maximum bass
output from the system.
• Increase the subwoofer
level, using the level-
adjustment instructions
found earlier in this manual.
• Increase the level of bass,
using the remote control.
Troubleshooting
ESC333 Simply Cinema OM 5/24/00 12:17 PM Page 14
Click on the first or last page to see other ESC 333 Sub (serv.man9) service manuals if exist.