Read JBL ES 150PW EMC - CB Certificate online
Page 37 of 48
Report No. 806700
IEC
60065
Clause
Requirement – Test
Result - Remark
Verdict
TRF No.: IEC60065F
TRF Originator: ASTA BEAB
GROUP DIFFERENCES FOR AMENDMENT 1
COMMON MODIFICATIONS
5.1 i)
in EN 60065:2002
Replace the note by:
NOTE For RATED POWER CONSUMPTION measurements of TVs reference is made to
EN 62087. Measurements are done in the ON (play) operating mode.
Replace the note by:
NOTE For RATED POWER CONSUMPTION measurements of TVs reference is made to
EN 62087. Measurements are done in the ON (play) operating mode.
N/A
5.4.1
Add the following indent:
za) A warning that excessive sound pressure from earphones and headphones can cause
hearing loss.
za) A warning that excessive sound pressure from earphones and headphones can cause
hearing loss.
N/A
6.1
6.1
6.1
in EN 60065:2002
Replace the subclause by:
Replace the subclause by:
Ionizing radiation
Equipment that might produce ionizing radiation is checked by measuring the amount of radiation.
The amount of radiation is determined by means of a radiation monitor of the ionizing chamber
type with an effective area of 1 000 mm2 or by measuring equipment of other types giving
equivalent results.
Measurements are made with the equipment on test operating at the most unfavourable supply
voltage (see 4.2) and with operator controls and service controls adjusted so as to give maximum
radiation whilst maintaining the equipment operative for normal use.
Internal preset controls not intended to be adjusted during the lifetime of the equipment are not
considered to be service controls.
At any point 100 mm from the surface of the operator access area, the dose-rate shall not exceed
Equipment that might produce ionizing radiation is checked by measuring the amount of radiation.
The amount of radiation is determined by means of a radiation monitor of the ionizing chamber
type with an effective area of 1 000 mm2 or by measuring equipment of other types giving
equivalent results.
Measurements are made with the equipment on test operating at the most unfavourable supply
voltage (see 4.2) and with operator controls and service controls adjusted so as to give maximum
radiation whilst maintaining the equipment operative for normal use.
Internal preset controls not intended to be adjusted during the lifetime of the equipment are not
considered to be service controls.
At any point 100 mm from the surface of the operator access area, the dose-rate shall not exceed
1 μSv/h (0,1 mR/h) (see Note). Account shall be taken of the background level.
NOTE These values appear in Directive 96/29/Euratom.
NOTE These values appear in Directive 96/29/Euratom.
N/A
Bibliography
in EN
60065:2002
in EN
60065:2002
Replace the paragraph related to prEN 50332-2 by:
EN 50332-2:2003, Sound system equipment: Headphones and earphones associated with
portable audio equipment - Maximum sound pressure level measurement methodology and limit
considerations - Part 2: Matching of sets with headphones if either or both are offered separately
EN 60065:2002/A1:2006 - 4 -
EN 50332-2:2003, Sound system equipment: Headphones and earphones associated with
portable audio equipment - Maximum sound pressure level measurement methodology and limit
considerations - Part 2: Matching of sets with headphones if either or both are offered separately
EN 60065:2002/A1:2006 - 4 -
N/A
Bibliography
in IEC
60065:2001/A
1:2005
in IEC
60065:2001/A
1:2005
Add the following notes for the standards indicated:
IEC 60598-2-9 NOTE Harmonized as EN 60598-2-9:1989 + A1:1994 (not modified).
IEC 60598-2-17 NOTE Harmonized as EN 60598-2-17:1989 + A2:1991 (not modified).
IEC 60598-2-9 NOTE Harmonized as EN 60598-2-9:1989 + A1:1994 (not modified).
IEC 60598-2-17 NOTE Harmonized as EN 60598-2-17:1989 + A2:1991 (not modified).
P
Click on the first or last page to see other ES 150PW service manuals if exist.