Read JBL EMC - CB Certificate (serv.man6) EMC - CB Certificate online
Issue Date:
2014-08-11
Page 17 of 43
Report Reference #
BTL-CB-1-S1407C070
IEC
60950-1
Clause
Requirement + Test
Result - Remark
Verdict
TRF No. IEC60950_1F
2.10.11
Tests for semiconductor devices and cemented
joints
joints
N/A
2.10.12
Enclosed and sealed parts
N/A
3
WIRING, CONNECTIONS AND SUPPLY
P
3.1 General
P
3.1.1
Current rating and overcurrent protection
P
3.1.2
Protection against mechanical damage
Wires do not touch sharp
edges which could damage
the insulation and cause
hazard.
edges which could damage
the insulation and cause
hazard.
P
3.1.3
Securing of internal wiring
The wires are secured by
soldering, solder pins and
quick connect terminals so
that a loosening of the
terminal connection is
unlikely.
soldering, solder pins and
quick connect terminals so
that a loosening of the
terminal connection is
unlikely.
P
3.1.4
Insulation of conductors
N/A
3.1.5
Beads and ceramic insulators
N/A
3.1.6
Screws for electrical contact pressure
N/A
3.1.7
Insulating materials in electrical connections
N/A
3.1.8
Self-tapping and spaced thread screws
N/A
3.1.9
Termination of conductors
All terminations are fixed
reliable.
reliable.
P
10 N pull test
Complied.
P
3.1.10
Sleeving on wiring
N/A
3.2
Connection to a mains supply
N/A
3.2.1
Means of connection
N/A
3.2.1.1
Connection to an a.c. mains supply
N/A
3.2.1.2
Connection to a d.c. mains supply
N/A
3.2.2
Multiple supply connections
N/A
3.2.3
Permanently connected equipment
N/A
Number of conductors, diameter of cable and
conduits (mm) ....................................................... :
conduits (mm) ....................................................... :
3.2.4 Appliance
inlets
N/A
Click on the first or last page to see other EMC - CB Certificate (serv.man6) service manuals if exist.