Read JBL DUET II (serv.man7) EMC - CB Certificate online
- Page 10 of 51 -
www.nemko.com
Report No. 114383
TRF No.:IECEN60950_1B
IEC 60950-1 / EN 60950-1
Clause
Requirement – Test
Result – Remark
Verdict
1.7.8.1 Identification,
location
and marking ....................:
No control.
N/A
1.7.8.2 Colours
...............................................................:
No indicators with colours
where safety is involved.
where safety is involved.
N/A
1.7.8.3 Symbols
.............................................................:
There is no switch in the
equipment, function control is
marked with “+” and “-” for
volume control.
marked with “+” and “-” for
volume control.
N/A
1.7.8.4 Markings
using figures ......................................:
N/A
1.7.9
Isolation of multiple power sources ....................:
Class III equipment.
N/A
1.7.10
IT power distribution systems
Class III equipment.
N/A
1.7.11
Thermostats and other regulating devices
No thermostats or other
regulating devices.
regulating devices.
N/A
1.7.12 Language
............................................................:
Instructions and markings shall
be in a language acceptable for
the country where the
equipment is to be used.
the country where the
equipment is to be used.
—
1.7.13
Durability
The marking withstands
required tests.
required tests.
P
1.7.14
Removable parts
No removable parts.
N/A
1.7.15
Replaceable batteries
No battery in the equipment.
N/A
Language.............................................................:
—
1.7.16
Operator access with a tool.................................:
All areas containing hazard(s)
are inaccessible to the
operator.
are inaccessible to the
operator.
N/A
1.7.17
Equipment for restricted access locations...........:
Equipment not intended for
installation in RAL.
installation in RAL.
N/A
2
PROTECTION FROM HAZARDS
—
2.1
Protection from electric shock and energy hazards
—
2.1.1
Protection in operator access areas
Refer below:
—
2.1.1.1
Access to energized parts
Class III equipment.
N/A
Test
by
inspection ...............................................:
N/A
Test
with
test finger ............................................:
N/A
Test
with
test pin .................................................:
N/A
Test
with
test probe ............................................:
N/A
2.1.1.2 Battery
compartments
........................................:
No TNV circuits in the
equipment.
equipment.
N/A
2.1.1.3
Access to ELV wiring
No internal wiring at ELV
accessible to the operator.
accessible to the operator.
N/A
Click on the first or last page to see other DUET II (serv.man7) service manuals if exist.