Read JBL DUET II (serv.man3) EMC - CB Certificate online
- Page 11 of 65 -
Report
No.
114383
IEC 60950-1:2005 / EN 60950-1:2006
Clause
Requirement + Test
Result - Remark
Verdict
TRF No. IECEN60950_1C
1.7.8.4 Markings
using figures .......................................:
N
1.7.9
Isolation of multiple power sources .....................:
Class III equipment.
N
1.7.10
Thermostats and other regulating devices ..........:
No thermostats or other
regulating devices.
regulating devices.
N
1.7.11
Durability
The marking withstands
required tests.
required tests.
P
1.7.12
Removable parts
No removable parts.
N
1.7.13 Replaceable
batteries ..........................................:
No battery in the equipment.
N
Language(s)
........................................................:
⎯
1.7.14
Equipment for restricted access locations ...........:
Equipment not intended for
intallation in RAL.
intallation in RAL.
N
2
PROTECTION FROM HAZARDS
—
2.1
Protection from electric shock and energy hazards
—
2.1.1
Protection in operator access areas
Refer below:
—
2.1.1.1
Access to energized parts
Class III equipment.
N
Test by inspection .................................................:
—
Test with test finger (Figure 2A) ............................:
—
Test with test pin (Figure 2B) ................................:
—
Test with test probe (Figure 2C) ...........................:
—
2.1.1.2
Battery compartments
No TNV circuits in the
equipment.
equipment.
N
2.1.1.3
Access to ELV wiring
No internal wiring at ELV
accessible to the operator.
accessible to the operator.
N
Working voltage (Vpeak or Vrms); minimum
distance through insulation (mm)
distance through insulation (mm)
⎯
2.1.1.4
Access to hazardous voltage circuit wiring
Class III equipment.
N
2.1.1.5 Energy
hazards .....................................................:
Class III equipment, supplies
from a LPS.
from a LPS.
N
2.1.1.6
Manual controls
No shafts of knobs etc. at ELV
or hazardous voltage.
or hazardous voltage.
N
2.1.1.7
Discharge of capacitors in equipment
Class III equipment.
N
Measured voltage (V); time-constant (s)................:
⎯
2.1.1.8
Energy hazards – d.c. mains supply
Supplied from SELV.
N
Click on the first or last page to see other DUET II (serv.man3) service manuals if exist.