Read JBL DPS 10 User Guide / Operation Manual online
– 5 –
3) If your receiver/ampli-
fier has preamp output
jacks and main input
jacks for the left and
right channels or you
have a separate pre-
amp/processor and
power amplifier.
jacks and main input
jacks for the left and
right channels or you
have a separate pre-
amp/processor and
power amplifier.
This method of hookup can
offer the highest level of per-
formance for your complete
loudspeaker system. The
DPS-10 incorporates a
variable high-pass crossover
in addition to a variable
low-pass crossover. When
offer the highest level of per-
formance for your complete
loudspeaker system. The
DPS-10 incorporates a
variable high-pass crossover
in addition to a variable
low-pass crossover. When
hooked up as shown above,
the subwoofer will limit the
low-frequency information
that is returned to your
receiver/amplifier. Your
receiver/amplifier does
not need to waste valuable
power reproducing the low
frequencies. In addition,
since no low-frequency
information is being sent
to your main loudspeakers,
they are able to reproduce
mid and high frequencies with
greater clarity.
the subwoofer will limit the
low-frequency information
that is returned to your
receiver/amplifier. Your
receiver/amplifier does
not need to waste valuable
power reproducing the low
frequencies. In addition,
since no low-frequency
information is being sent
to your main loudspeakers,
they are able to reproduce
mid and high frequencies with
greater clarity.
RECEIVER/AMPLIFIER
MAIN SPEAKER OUTPUT
LEFT
RIGHT
RIGHT
+ –
RIGHT
LOUDSPEAKER
LEFT
+ – – +
– +
LEFT
LOUDSPEAKER
PRE
OUT
OUT
MAIN
IN
Line
SPKR
In
In
SPKR
Out
High-Pass
Output
Output
Input
L
R
L
R
+
–
–
+
+
–
–
+
High
Pass
Pass
Phase
60
180
0
180
120
90
150
Level
Min
Max
Low
Pass
Pass
60
180
120
90
150
R L
DPS-10 OM 9/11/98 11:33 AM Page 5
Click on the first or last page to see other DPS 10 service manuals if exist.