Read JBL CST55 (serv.man8) User Guide / Operation Manual online
CST55, CSB5, CSC55,
CSS10
CSS10
JBL CINEMA SOUND
™
OWNER’S GUIDE
®
CST55
CSC55
CSB5
CSS10
English
2
READ FIRST!
Important Safety Precautions!
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near
water.
6. Clean only with a dry cloth.
7. Do not block any ventilation
openings. Install in accordance with
the manufacturer’s instructions.
8. Do not install near any heat
sources such as radiators, heat
registers, stoves or other apparatus
(including amplifiers) that produce
heat.
9. Do not defeat the safety purpose of
the polarized or grounding-type plug.
A polarized plug has two blades with
one wider than the other.
A grounding-type plug has two blades
and a third grounding prong. The
wide blade or the third prong are
provided for your safety. If the
provided plug does not fit into your
outlet, consult an electrician for
replacement of the obsolete outlet.
10. Protect the power cord from being
walked on or pinched, particularly at
plugs, convenience receptacles and
the point where they exit from the
apparatus.
11. Only use attachments/accessories
specified by the manufacturer.
12. Use only with the cart, stand,
tripod, bracket or table specified by
the manufacturer or sold with the
apparatus. When a cart is used, use
caution when moving the
cart/ apparatus
combination to avoid
injury from tip-over.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near
water.
6. Clean only with a dry cloth.
7. Do not block any ventilation
openings. Install in accordance with
the manufacturer’s instructions.
8. Do not install near any heat
sources such as radiators, heat
registers, stoves or other apparatus
(including amplifiers) that produce
heat.
9. Do not defeat the safety purpose of
the polarized or grounding-type plug.
A polarized plug has two blades with
one wider than the other.
A grounding-type plug has two blades
and a third grounding prong. The
wide blade or the third prong are
provided for your safety. If the
provided plug does not fit into your
outlet, consult an electrician for
replacement of the obsolete outlet.
10. Protect the power cord from being
walked on or pinched, particularly at
plugs, convenience receptacles and
the point where they exit from the
apparatus.
11. Only use attachments/accessories
specified by the manufacturer.
12. Use only with the cart, stand,
tripod, bracket or table specified by
the manufacturer or sold with the
apparatus. When a cart is used, use
caution when moving the
cart/ apparatus
combination to avoid
injury from tip-over.
13. Unplug this apparatus during
lightning storms or when unused for
long periods of time.
14. Refer all servicing to qualified
service personnel. Servicing is
required when the apparatus has
been damaged in any way, such as
power-supply cord or plug is
damaged, liquid has been spilled or
objects have fallen into the
apparatus, the apparatus has been
exposed to rain or moisture, does not
operate normally, or has been
dropped.
15. Do not use attachments not
recommended by the product
manufacturer, as they may cause
hazards.
16. This product should be operated
only from the type of power source
indicated on the marking label. If you
are not sure of the type of power
supply to your home, consult your
product dealer or local power
company. For products intended to
operate from battery power or other
sources, refer to the operating
instructions.
17. If an outside antenna or cable
system is connected to the product,
be sure the antenna or cable system
is grounded so as to provide some
protection against voltage surges and
built-up static charges. Article 810 of
the National Electrical Code,
ANSI/NFPA 70, provides information
with regard to proper grounding of
the mast and supporting structure,
grounding of the lead-in wire to an
antenna discharge unit, size of
grounding conductors, location of
antennadischarge unit, connection to
grounding electrodes, and
requirements for the grounding
electrode. See Figure A.
lightning storms or when unused for
long periods of time.
14. Refer all servicing to qualified
service personnel. Servicing is
required when the apparatus has
been damaged in any way, such as
power-supply cord or plug is
damaged, liquid has been spilled or
objects have fallen into the
apparatus, the apparatus has been
exposed to rain or moisture, does not
operate normally, or has been
dropped.
15. Do not use attachments not
recommended by the product
manufacturer, as they may cause
hazards.
16. This product should be operated
only from the type of power source
indicated on the marking label. If you
are not sure of the type of power
supply to your home, consult your
product dealer or local power
company. For products intended to
operate from battery power or other
sources, refer to the operating
instructions.
17. If an outside antenna or cable
system is connected to the product,
be sure the antenna or cable system
is grounded so as to provide some
protection against voltage surges and
built-up static charges. Article 810 of
the National Electrical Code,
ANSI/NFPA 70, provides information
with regard to proper grounding of
the mast and supporting structure,
grounding of the lead-in wire to an
antenna discharge unit, size of
grounding conductors, location of
antennadischarge unit, connection to
grounding electrodes, and
requirements for the grounding
electrode. See Figure A.
18. An outside antenna system
should not be located in the vicinity
of overhead power lines or other
electric light or power circuits, or
where it can fall into such power
lines or circuits. When installing an
outside antenna system, extreme
care should be taken to keep from
touching such power lines or circuits,
as contact with them might be fatal.
19. Do not overload wall outlets,
extension cords, or integral
convenience receptacles, as this can
result in a risk of fire or electric
shock.
20. Never push objects of any kind
into this product through openings, as
they may touch dangerous voltage
points or short-out parts, which could
result in a fire or electric shock.
Never spill liquid of any kind on the
product.
21. The apparatus shall not be
exposed to dripping or splashing,
and no objects filled with liquids,
such as vases, shall be placed on
the apparatus.
22. Do not attempt to service this
product yourself, as opening or
removing covers may expose you to
dangerous voltage or other hazards.
Refer all servicing to qualified
service personnel.
23. When replacement parts are
required, be sure the service
technician has used replacement
parts specified by the manufacturer
or that have the same characteristics
as the original part. Unauthorized
substitutions may result in fire,
electric shock or other hazards.
24. Upon completion of any service or
repairs to this product, ask the
service technician to perform safety
checks to determine that the product
is in proper operating condition.
25. The product should be mounted to
a wall or ceiling only as
recommended by the manufacturer.
should not be located in the vicinity
of overhead power lines or other
electric light or power circuits, or
where it can fall into such power
lines or circuits. When installing an
outside antenna system, extreme
care should be taken to keep from
touching such power lines or circuits,
as contact with them might be fatal.
19. Do not overload wall outlets,
extension cords, or integral
convenience receptacles, as this can
result in a risk of fire or electric
shock.
20. Never push objects of any kind
into this product through openings, as
they may touch dangerous voltage
points or short-out parts, which could
result in a fire or electric shock.
Never spill liquid of any kind on the
product.
21. The apparatus shall not be
exposed to dripping or splashing,
and no objects filled with liquids,
such as vases, shall be placed on
the apparatus.
22. Do not attempt to service this
product yourself, as opening or
removing covers may expose you to
dangerous voltage or other hazards.
Refer all servicing to qualified
service personnel.
23. When replacement parts are
required, be sure the service
technician has used replacement
parts specified by the manufacturer
or that have the same characteristics
as the original part. Unauthorized
substitutions may result in fire,
electric shock or other hazards.
24. Upon completion of any service or
repairs to this product, ask the
service technician to perform safety
checks to determine that the product
is in proper operating condition.
25. The product should be mounted to
a wall or ceiling only as
recommended by the manufacturer.
Figure A.
Example of Antenna Grounding as per
National ElectricalCode ANSI/NFPA 70
Example of Antenna Grounding as per
National ElectricalCode ANSI/NFPA 70
3
INCLUDED
Each model sold separately
Each model sold separately
THANK YOU FOR CHOOSING JBL
For more than 60 years, JBL
has been involved in every
aspect of music and film
recording and reproduction,
from live performances to the
recordings you play in your
home, car or office.
has been involved in every
aspect of music and film
recording and reproduction,
from live performances to the
recordings you play in your
home, car or office.
We’re confident that the JBL
system you have chosen will
system you have chosen will
provide every note of
enjoyment that you expect –
and that when you think about
purchasing additional audio
equipment for your home, car
or office, you will once again
choose JBL.
enjoyment that you expect –
and that when you think about
purchasing additional audio
equipment for your home, car
or office, you will once again
choose JBL.
Please take a moment to
register your product on our
register your product on our
Web site at www.jbl.com.
It enables us to keep you
posted on our latest advance-
ments, and helps us to better
understand our customers
and build products that meet
their needs and expectations.
It enables us to keep you
posted on our latest advance-
ments, and helps us to better
understand our customers
and build products that meet
their needs and expectations.
JBL Consumer Products
CST55
CSC55
CSS10
Grille
Grille
(2) Wall brackets
(1) Wall bracket
CSB5
Grille
4
SPEAKER PLACEMENT
SUBWOOFER
SURROUND SPEAKERS
FRONT
SPEAKERS
SPEAKERS
0–2 ft
0–0.6m
The front speakers should be
placed the same distance
from each other as they are
from the listening position.
The CSB5 speakers should be
placed at about the same
height from the floor as the
listeners’ ears will be, or they
may be angled toward the
listeners.
placed the same distance
from each other as they are
from the listening position.
The CSB5 speakers should be
placed at about the same
height from the floor as the
listeners’ ears will be, or they
may be angled toward the
listeners.
The center channel speaker
should be placed slightly
behind the front left and right
speakers, and no more than
2 feet (0.6m) above or below
the tweeters of the left and
right speakers. It is often
convenient to set the center
speaker on top of the
television set, as shown in the
drawing.
should be placed slightly
behind the front left and right
speakers, and no more than
2 feet (0.6m) above or below
the tweeters of the left and
right speakers. It is often
convenient to set the center
speaker on top of the
television set, as shown in the
drawing.
The JBL Cinema Sound
speaker system may be used
in 5.1-, 6.1- or 7.1-channel
applications. In 5.1-channel
applications, two of the
surround speakers should be
speaker system may be used
in 5.1-, 6.1- or 7.1-channel
applications. In 5.1-channel
applications, two of the
surround speakers should be
placed slightly behind the
listening position and, ideally,
should face each other and be
at a level higher than the
listeners’ ears. If that is not
possible, they may be placed
against a wall behind the
listening position, facing
forward. In 6.1-channel appli-
cations, two of the surround
speakers should be placed in
the side positions, and a
single surround back speaker
should be placed against the
wall behind the listening
position. In 7.1-channel
applications, place two of the
surround speakers in the side
positions, and place the two
surround back speakers
against the rear wall.
listening position and, ideally,
should face each other and be
at a level higher than the
listeners’ ears. If that is not
possible, they may be placed
against a wall behind the
listening position, facing
forward. In 6.1-channel appli-
cations, two of the surround
speakers should be placed in
the side positions, and a
single surround back speaker
should be placed against the
wall behind the listening
position. In 7.1-channel
applications, place two of the
surround speakers in the side
positions, and place the two
surround back speakers
against the rear wall.
In Dolby
®
Digital and DTS
®
systems, it is best to aim all of
the speakers (except the
subwoofer) toward the
listening position at or slightly
above about ear-level height.
the speakers (except the
subwoofer) toward the
listening position at or slightly
above about ear-level height.
In systems where only analog
surround processing (such as
Dolby Pro Logic
surround processing (such as
Dolby Pro Logic
®
II) is
available, it may be preferable
to aim the speakers straight
out from the wall to obtain a
more diffuse sound.
to aim the speakers straight
out from the wall to obtain a
more diffuse sound.
The low-frequency material
reproduced by the subwoofer
is mostly omnidirectional, and
this speaker may be placed in
a convenient location in the
room. However, bass
reproduction will be
maximized when the
subwoofer is placed in a
corner along the same wall as
the front speakers.
Experiment with subwoofer
placement by temporarily
placing the subwoofer in the
listening position and moving
around the room until the bass
reproduction is best. Place the
subwoofer in that location.
reproduced by the subwoofer
is mostly omnidirectional, and
this speaker may be placed in
a convenient location in the
room. However, bass
reproduction will be
maximized when the
subwoofer is placed in a
corner along the same wall as
the front speakers.
Experiment with subwoofer
placement by temporarily
placing the subwoofer in the
listening position and moving
around the room until the bass
reproduction is best. Place the
subwoofer in that location.
CENTER CHANNEL
SPEAKER
SPEAKER
† Single surround back speaker
may be used with 6.1 receivers
and processors.
and processors.
Alternate placement for surround speakers when only 5.1 channels are used; required placement for surround back
speakers in 7.1-channel systems.
speakers in 7.1-channel systems.
