CONTROL X WIRELESS - JBL Audio Service Manual (repair manual). Page 6

What’s in the box

2 x JBL Control X Wireless Speakers
2 x Power Cords
2 x Removable Grilles
Quick Start Guide
Safety Sheet

Product specifi cations 

  

Bluetooth

®

 version: 2.1 + EDR

  

Support: A2DP V1.3, AVRCP V1.5

  

Low frequency: 5.25" (133mm) polypropylene 
graphite-fi lled cone woofer 

  

High frequency: 1" (25mm) CMMD

®

Lite dome tweeter

  

Rated power: 30W per channel RMS
(AC mode) 

  

Frequency response: 62Hz–20kHz (-6db)

  

Signal-to-noise ratio: >75dB 

  

Power supply: AC 100–240 VAC, 50–60Hz 

  

Battery type: Lithium-ion Polymer
(7.4V, 2600mAh) 

  

Battery charge time: 2.4 hours @ 0.5C 

  

Playback time: Up to 4 hours
(varies by volume level and audio content) 

  

Bluetooth

®

 transmitter power: 0-4dBm 

  

Bluetooth

®

 transmitter frequency range:

2.402 – 2.480GHz 

  

Bluetooth

®

 transmission range: Up to 10m

(from source)

  

Speaker range: Up to 30m
(between primary and secondary speakers)

  

Dimensions: 9-1/4" x 6-1/2" x 6-1/4"
(235mm x 165mm x 159mm)

  

Weight: 6.5 lbs (2.95kg)

  

Finishes: Graphite/White/Red 

®

 word mark and logo are registered trademarks and are owned by the Bluetooth SIG, Inc., 

and any use of such marks by HARMAN International Industries, Incorporated, is under license. Features, 
specifications and appearance are subject to change without notice.

5.25" (133mm) Portable Stereo Bluetooth

®

 Speakers

Battery-powered stereo Bluetooth

®

 speakers without the wires

Stream via Bluetooth

®

 or use the rear 3.5mm input for stereo or mono playback. Unlike other 

stereo speakers, there’s no need for an interconnect cable or wire between each speaker.

Use one or both speakers inside or outside your home, without the restrictions of a transmitter or wired 

cable connection. 

30W Class-D digital amplifi cation 

Be the life of the party with 30 watts of uninhibited power from each speaker. While other powered 

speakers distort at high levels, JBL Control X Wireless speakers provide clean, undistorted audio at any 

volume. Make a statement by being heard loud and clear.

High Defi nition Imaging (HDI) waveguide with 1" (25mm) CMMD

®

 Lite tweeter 

Hear the truth. This proprietary waveguide technology provides the same lifelike stereo imaging 

and detail found in the world’s most renowned studios, clubs, concert halls, theaters, arenas, and 

stadiums. Simply put, JBL Control X Wireless speakers were engineered to put the performance 

right in front of you. 

5.25" (133mm) polypropylene graphite-fi lled cone woofer

We are all about the bass. JBL has a rich history in transducer and acoustic design and it shows 

with Control X Wireless. We intentionally use a stiff cone material that works in conjunction with 

our rear patented Slipstream-tuned port. This results in tight, block-rocking beats no matter the 

genre.

Rugged, contemporary design for indoors or on-the-go

JBL Control X Wireless speakers were built to bring out the best in your music no matter the space. 

These speakers will rock your home, dorm, or commercial space, along with any street, park, campsite, 

beach, or social event. The rear port also serves as a carrying handle.

Ability to add an additional pair of speakers 

Allows up to 4 Control X Wireless speakers to work together to provide expanded, super-sized stereo 

or summed mono coverage to a wide area without the need for additional wires between each speaker 

(additional pair sold separately). 

Stereo or summed mono modes with channel assignment

Depending on the location and use, you have the flexibility to assign each speaker as Left, 

Right, or Left+Right (summed mono). For a wider soundstage, simply switch both speakers into 

summed mono mode. You can also use the primary speaker by itself in summed mono mode for 

convenience and portability. 

Boundary compensation switch

Hit the switch and the JBL Control X Wireless speakers instantly adjust the EQ based on whether the 

speakers are wall-mounted or placed on a fl at surface (mounting hardware sold separately).

Top Surface Volume and Playback Control 

A rubberized interface on top of the primary speaker allows quick and easy access to playback 

and volume controls. You can manually pause, play, or skip tracks back and forward without an 

app or remote.