Read JBL CINEMA SOUND 3 EMC - CB Certificate online
Page 2 of 70 Report No. JSH JSH006110064-002
TRF No: IEC/EN 60065H
TRF originator Intertek ETL SEMKO SH
Test item
Description ........................ : DVD Receiver
Trademark .......................................... : JBL
Model and/or type reference.............. : CINEMA SOUND 3
Manufacturer ...................................... : WANLIDA GROUP CO., LTD.
WANLIDA INDUSTRY ZONE, NANJING, FUJIAN, CHINA. 363601
Rating(s)............................................. : 100-240 V~, 50/60 Hz, 380 W, Class II
............................................................ :
Copy of marking plate
On DVD loader:
Summary of Testing and Conclusions:
From the result of our examination and tests in the submitted samples, conclude they comply with the
requirements of the standard IEC 60065_2001+A1_2005.
All alternative components of T501, T502, L512 & L513 were tested according this standards, and the worst
records were showed on this report.
From the result of our examination and tests in the submitted samples, conclude they comply with the
requirements of the standard IEC 60065_2001+A1_2005.
All alternative components of T501, T502, L512 & L513 were tested according this standards, and the worst
records were showed on this report.
Page 3 of 70 Report No. JSH JSH006110064-002
TRF No: IEC/EN 60065H
TRF originator Intertek ETL SEMKO SH
Test case verdicts
Test case does not apply to the test object.................. : N/A
Test item does meet the requirement .......................... : P(ass)
Test item does not meet the requirement .................... : F(ail)
Testing
Date of receipt of test item ........................................... : November 3, 2006
Date(s) of performance of test...................................... : November 3, 2006 –November 20, 2006
General remarks
This report shall not be reproduced except in full without the written approval of the testing laboratory.
The test results presented in this report relate only to the item(s) tested.
Determination of the test result includes consideration of measurement uncertainty from the test equipment
and methods.
"(see appended table)" refers to a table appended to the report.
This report shall not be reproduced except in full without the written approval of the testing laboratory.
The test results presented in this report relate only to the item(s) tested.
Determination of the test result includes consideration of measurement uncertainty from the test equipment
and methods.
"(see appended table)" refers to a table appended to the report.
“(see remark #)” refers to a remark appended to the report.
“(see Annex #) refers to an annex appended to the report.
Throughout this report a point is used as the decimal separator.
Throughout this report all the models are tested as typical models.
General product information:
N/A
