Read JBL Boost TV (serv.man2) Service Manual online
Bluetooth Section
Description
Specification
Bluetooth Standard
Version 3.0 + EDR
Frequency Band
2.402 – 2.480 GHz
Host Interface
UART
Profile Supported
SPP (Serial Port Profile)
A2DP (Advanced Audio Distribution Profile)
AVRCP (Audio/Video Remote Control Profile)
A2DP (Advanced Audio Distribution Profile)
AVRCP (Audio/Video Remote Control Profile)
Technical Specifications
Description
Specification
Rated Output Power at 1% THD+N
15W x2 (4 ohm load)
Measure at 1KHz
Measure at 1KHz
System gain
Analog : 30dB +/- 1dB
Digital : 30dB +/- 1dB
Measure at 1KHz
Digital : 30dB +/- 1dB
Measure at 1KHz
Input Sensitivity
Analog : 250mV +/- 1dB
Digital : -18dBFS +/- 1dB
Measure at 1KHz
Digital : -18dBFS +/- 1dB
Measure at 1KHz
Input Overload
Analog : 2V rms
Frequency Response (Output Power)
60Hz to 20KHz
THD+N at 1W
<0.3 %
THD+N at Rated Output Power
<1%
Signal-to-Noise ratio at 1W (A-Weighted)
72dB (A-Weighted)
Signal-to-Noise ratio at Rated Output Power
85dB (A-Weighted)
Signal-to-Noise ratio at 1W (A-Weighted
44.1KHz 16bit)
44.1KHz 16bit)
>63dB
Signal-to-Noise ratio at Rated Output
Power(44.1KHz 16bit)
Power(44.1KHz 16bit)
>76dB
Channel Separation(EQ setting is disable)
60dB@100Hz
60dB @1KHz
60dB @10KHz
60dB @1KHz
60dB @10KHz
Function Crosstalk
75dB@100Hz
70dB @1KHz
65dB @10KHz
70dB @1KHz
65dB @10KHz
Dynamic range
85dB@1KHz
Input Impedance
>10Kohm
Residual Noise
1.2mV rms
DC Offset
<30mV
Damping Factor
>10
Signal Sensing(ATO) at 1 kHz
Analog: <5mV
Digital : < -70dBF
Digital : < -70dBF
Audio Amplifier Section
Click on the first or last page to see other Boost TV (serv.man2) service manuals if exist.