Read JBL BD 100 (serv.man2) Service Manual online
Software Upgrade
1.Upgrade from USB:
Copy the upgrade file
JBL_Cinema_V00.XX.bin
(
XX is the software version),
JBL_Cinema_MCU.bin(
MCU software
),
JBL_Cinema.txt (
MCU MD5_File
)
to USB root.
Then insert USB ,start up DUT enter "setup" into SETTINGS
screen ,select General Settings >>System>> system update >>USB Storage.
When upgrade file detected, press "Enter" to upgrade, select
"
" to cancel.
Once you start upgrade,pls don’t power off the DUT,after
upgrade DUT will restart up later a moment time or you press
button “Enter” on remote control .
2. Check the version information after upgraded.
Wake up DUT,press Enter to settings and the select system information.
you will see a interface as below:
3.Factory Reset Steps
Press "SETUP" but ton on re mote control --->General Settings ---> System -->
Restore default s
Select OK--->Press"ENTER" on remote controll.
Software Version: BD100(or BD300) VXX.XX.XX
MAC:XX: XX: XX: XX: XX: XX
MAC:XX: XX: XX: XX: XX: XX
4-1
Click on the first or last page to see other BD 100 (serv.man2) service manuals if exist.