Read JBL AUTHENTICS L8 (serv.man4) EMC - CB Certificate online
Report No.: EM201300471-1 Application No.:
ZJ00032008 Page 8 of 57
4.
RADIO TECHNICAL REQUIREMENTS SPECIFICATION IN EN
300 328
4.1 MAXIMUM TRANSMIT POWER
4.1.1 LIMITS
Frequency
EN300 328 clause 4.3.1
2400MHz~2483.5 MHz
20 dBm (i.e. 100mW)
4.1.2 TEST PROCEDURE
Test requirement:
EN 300 328 clause 4.3.1
Test Method:
EN 300 328 clause 5.7.2.2
EUT Operation:
Fixed Frequency
Status:
Keep EUT on transmitting mode by the software provided by
manufacturer.
manufacturer.
Test channel:
Lowest channel: (2402MHz)
Middle channel: (2441MHz),
Highest channel: (2480MHz)
Middle channel: (2441MHz),
Highest channel: (2480MHz)
Test condition:
Normal and extreme test conditions.
Equipment Used:
Refer to section 3.4
Test Procedure:
As annex C1 of standard EN 300328
Remark: Pre-test the 3 modulation to find GFSK and 8DPSK is worse case, so only record GFSK
and 8DPSK test data.
4.1.3 TEST SETUP
Antenna
EUT
Attenuator
Receiver
Click on the first or last page to see other AUTHENTICS L8 (serv.man4) service manuals if exist.