AUTHENTICS L8 (serv.man4) - JBL Audio EMC - CB Certificate (repair manual)

authentics l8 (serv.man4) emc - cb certificate
Model
AUTHENTICS L8 (serv.man4)
Pages
57
Size
1.34 MB
Type
PDF
Document
EMC - CB Certificate
Brand
Device
Audio
File
authentics-l8-sm4.pdf
Date

Read JBL AUTHENTICS L8 (serv.man4) EMC - CB Certificate online

 
 
 
 
TEST REPORT
 
 
 
 
Report No.: 
EM201300471-1
 
Application No.: 
ZJ00032008 
Applicant: 
Harman International Industries, Incorporated 
Applicant 
Address: 
Sample Description: 
Active speaker system with wireless streaming 
Model: 
AUTHENTICS L16
 
Adding Model: 
AUTHENTICS L8 
Test Specification: 
EN300328 V1.7.1:2006 Electromagnetic compatibility and Radio spectrum Matters 
(ERM); Wideband transmission systems; Data transmission equipment operating in the 
2,4 GHz ISM band and using wide band modulation techniques; Harmonized EN 
covering essential requirements under article 3.2 of the R&TTE Directive   
Test  Date: 
2013-08-08 to 2013-09-09 
Issue Date: 
2013-09-10 
Test Result: 
Pass. 
Tested By: 
Reviewed By: 
Approved By: 
Lynn Xiao / Test Engineer 
Jane Cao /      Test Engineer 
Gavin Wu /    Manager 
 
Date:2013-09-10 
 
Date:2013-09-10 
 
Date:2013-09-10 
Other Aspects: 
 
None 
Abbreviations: ok / P = passed; fail / F = failed; n.a. / N = not applicable 
The test result in this test report refers exclusively to the presented test sample. This report shall not be reproduced except in full, without the written 
approval of GRGT. 
GRG Metrology and Test Technology Co., Ltd. 
Address: 163, Pingyun Road, West of Huangpu Avenue, Guangzhou, Guangdong, P.R. China 
Tel:+86-20-38699960 Fax:+86-20-38695185 
Email: 
 
 
Ver.:2.0 / 01.Jan.2012 
Report No.: EM201300471-1                       Application No.:
 
ZJ00032008                  Page 2 of 57 
 
DIRECTIONS OF TEST 
 
1. This station carries out test task according to the national regulation of 
verifications which can be traced to National Primary Standards and 
BIPM. 
 
2. The test report merely corresponds to the test sample. It is not permitted 
to copy extracts of these test result without the written permission of the 
test laboratory. 
 
3. If there is any objection concerning the test, the client should inform the 
laboratory within 15 days from the date of receiving the test report. 
Report No.: EM201300471-1                       Application No.:
 
ZJ00032008                  Page 3 of 57 
Table of Contents
 
1. TEST RESULT SUMMARY .................................................................................................................................. 4 
2. GENERAL DESCRIPTION OF EUT ................................................................................................................... 5 
2.1
 
APPLICANT ..................................................................................................................................................................... 5 
2.2
 
MANUFACTURER .......................................................................................................................................................... 5 
2.3 BASIC
 
DESCRIPTION
 
OF
 
EQUIPMENT
 
UNDER
 
TEST .............................................................................................. 5 
3. LABORATORY AND ACCREDITATIONS ........................................................................................................ 6 
3.1
 
LABORATORY ............................................................................................................................................................... 6 
3.2
 
ACCREDITATIONS ........................................................................................................................................................ 6 
3.3
 
MEASUREMENT
 
UNCERTAINTY ............................................................................................................................... 6 
3.4
 
LIST
 
OF
 
USED
 
TEST
 
EQUIPMENT
 
AT
 
GRGT ............................................................................................................. 7 
4. RADIO TECHNICAL REQUIREMENTS SPECIFICATION IN EN 300 328 ................................................. 8 
4.1
 
MAXIMUM
 
TRANSMIT
 
POWER .................................................................................................................................. 8 
4.1.1 LIMITS ........................................................................................................................................................ 8
 
4.1.2 TEST PROCEDURE ................................................................................................................................... 8
 
4.1.3 TEST SETUP ............................................................................................................................................... 8
 
4.1.4 TEST RESULTS ........................................................................................................................................... 9
 
4.2
 
FREQUENCY
 
RANGE .................................................................................................................................................. 16 
4.2.1 LIMITS ...................................................................................................................................................... 16
 
4.2.2 TEST PROCEDURE ................................................................................................................................. 16
 
4.2.3 TEST SETUP ............................................................................................................................................. 16
 
4.2.4 TEST RESULTS ......................................................................................................................................... 16
 
4.3
 
DWELL
 
TIME ................................................................................................................................................................ 20 
4.3.1 LIMITS ...................................................................................................................................................... 20
 
4.3.2 TEST PROCEDURE ................................................................................................................................. 20
 
4.3.3 TEST SETUP ............................................................................................................................................. 20
 
4.3.4 TEST RESULTS ......................................................................................................................................... 20
 
4.4
 
HOPPING
 
CHANNEL
 
SEPARATION .......................................................................................................................... 37 
4.4.1 LIMITS ...................................................................................................................................................... 37
 
4.4.2 TEST PROCEDURE ................................................................................................................................. 37
 
4.4.3 TEST SETUP ............................................................................................................................................. 37
 
4.4.4 TEST RESULTS ......................................................................................................................................... 37
 
4.5
 
HOPPING
 
CHANNEL
 
SEQUENCE .............................................................................................................................. 41 
4.5.1 LIMITS ...................................................................................................................................................... 41
 
4.5.2 TEST PROCEDURE ................................................................................................................................. 41
 
4.5.3 TEST SETUP ............................................................................................................................................. 41
 
4.5.4 TEST RESULTS ......................................................................................................................................... 41
 
4.6
 
MEDIUM
 
ACCESS
 
PROTOCOL .................................................................................................................................. 43 
4.6.1 DEFINITION ............................................................................................................................................ 43
 
4.6.2 REQUIREMENT ....................................................................................................................................... 43
 
4.6.3 FREQUENCY HOPPING SYSTEM .......................................................................................................... 43
 
4.6.4 TEST RESULTS ......................................................................................................................................... 44
 
4.7
 
TRANSMITTER
 
SPURIOUS
 
EMISSIONS ................................................................................................................... 45 
4.7.1 LIMITS ...................................................................................................................................................... 45
 
4.7.2 TEST PROCEDURE ................................................................................................................................. 45
 
4.7.3 TEST SETUP ............................................................................................................................................. 46
 
4.7.4 TEST RESULTS ......................................................................................................................................... 47
 
5. RECEIVER REQUIREMENTS .......................................................................................................................... 50 
5.1
 
RECEIVER
 
SPURIOUS
 
EMISSIONS ........................................................................................................................... 50 
5.1.1 LIMITS ...................................................................................................................................................... 50
 
5.1.2 TEST PROCEDURE ................................................................................................................................. 50
 
5.1.3 TEST SETUP ............................................................................................................................................. 51
 
5.1.4 TEST RESULTS ......................................................................................................................................... 52
 
APPENDIX A: PHOTOGRAPH OF THE TEST ARRANGEMENT .................................................................. 53 
APPENDIX B: PHOTOGRAPH OF THE EUT ..................................................................................................... 54 
 
Report No.: EM201300471-1                       Application No.:
 
ZJ00032008                  Page 4 of 57 
1. TEST RESULT SUMMARY   
Transmitter Part 
Test Item 
Test Requirement 
Test Method 
Limit / Severity 
Result 
Equivalent 
isotropic radiated 
power 
EN 300 328:2006 
V1.7.1 clause 4.3.1 
EN 300 328:2006 
V1.7.1 clause 5.7.2 
20dBm(100mW)  
e.i.r.p. 
PASS 
Frequency Range 
EN 300 328:2006 
V1.7.1 clause 4.3.3 
EN 300 328:2006 
V1.7.1 clause 5.7.4 
2.4G to 2.483GHz 
PASS 
Dwell Time 
EN 300 328:2006 
V1.7.1 clause 4.3.4.1
EN 300 328:2006 
V1.7.1 clause 4.3.4.1
Max 0.4s 
PASS 
Hopping channel 
separation 
EN 300 328:2006 
V1.7.1 clause 4.3.4.2
EN 300 328:2006 
V1.7.1 clause 4.3.4.2
1MHz PASS 
Hopping sequence 
EN 300 328:2006 
V1.7.1 clause 4.3.4.3
EN 300 328:2006 
V1.7.1 clause 4.3.4.3
At least 15 hopping 
channels 
PASS 
Medium access 
protocol 
EN 300 328:2006 
V1.7.1 clause 4.3.5 
EN 300 328:2006 
V1.7.1 clause 4.3.5 
/ PASS 
Spurious Emission 
from Tx 
EN 300 328:2006 
V1.7.1 clause 4.3.6 
EN 300 328:2006 
V1.7.1 clause 5.7.5 
Table 2 & 3 
PASS 
Receiver Part 
Spurious Emission 
from Rx 
EN 300 328:2006 
V1.7.1 clause 4.3.7 
EN 300 328:2006 
V1.7.1 clause 5.7.6 
Table 4 & 5 
PASS 
Page of 57
Display

Download JBL AUTHENTICS L8 (serv.man4) EMC - CB Certificate

Here you can read online and download JBL AUTHENTICS L8 (serv.man4) EMC - CB Certificate in PDF. AUTHENTICS L8 (serv.man4) emc - cb certificate will guide through the process and help you recover, restore, fix, disassemble and repair JBL AUTHENTICS L8 (serv.man4) Audio. Information contained in service manuals typically includes schematics / circuit diagrams, wiring diagrams, block diagrams, printed wiring boards, exploded views, parts list, disassembly / assembly, pcb.