TD 470 (serv.man3) - Harman Kardon Audio User Guide / Operation Manual. Page 9

Save all packing material. It is essential for
shipping should you move or in the event the
unit ever needs repair.

Unit may be placed on top of or beneath
other stereo components, so long as its
placement meets the cooling requirements
of the component beneath it.

1. Make sure all stereo components are
turned off.

2. Use the cable provided to connect the left
and right input jacks of the cassette deck to
the “Tape Output” jacks of your pre-amplifier,
integrated amplifier or receiver.

3. Connect the left and right Output jacks on
the deck to the “Tape Input” jacks (often
labeled “Play”) on your receiver/pre-amp/
integrated amplifier.

NOTE: If you are using an equalizer and/or
other external signal processing
components, which are now connected to
the Tape Monitor loop of your receiver/pre-
amp/integrated amplifier, you have two
choices:

a. Connect the deck to the Tape Monitor
loop provided on the last outboard
component; or

b. If your receiver/pre-amp/integrated
amplifier has two Tape Monitor loops, you
may connect the cassette deck to the
unused loop. (In this case, the cassette deck
will be unaffected by the external signal
processing components.)

Connect the TD470 “Remote Out” jack to
the “Remote In” jack on a Harman Kardon
CD Player.

9

MODELNO.: 
TD470 
HARMAN KARDON
WOODBURY 
NEW YORK

LEFT

LEFT

RIGHT

RIGHT

SERIALNO.

DOLBY  NOISE REDUCTION AND HX PRO HEADROOM EXTENSION MANUFACTURED UND ER LICENSE 
FROM DOLBY LABORATORIES LICENSING CORPORATION. HX PRO ORIGINATED BY BANG & OLUFSEN. 
"DOLBY", THE DOUBLE-D       SYMBOL AND "HX PRO" ARE TRADEMARKS OF DOLBY LABORATORIES 
LICENSING CORPORATION.

INPUT

OUTPUT

REMOTE

IN

OUT

AC(     )230V50Hz/60Hz

ENGLISH

24505_TD470 eng  12/01/98 14:01  Side 9