SoundSticks II - Harman Kardon Audio EMC - CB Certificate (repair manual). Page 97

 

 

 

 

Page 90 of 91 

ST-05368 

 

IEC 60950-1 / EN 60950-1 

Clause 

Requirement – Test  

Result – Remark  

Verdict 

 

TRF No.: IECEN60950_1A 

 
 
 

4.2.8.1 

Enclosures around CRTs with a face diameter of 
160 mm or more are required to reduce the risk of 
injury due to the implosion of the CRT. 

No such devices within the EUT 

N/A 

4.3.2 

Equipment with handles is required to comply 
with special loading tests. 

No such devices within the EUT 

N/A 

5.1.8.3 

Equipment intended to receive 
telecommunication ringing signals is required to 
comply with a special touch current measurement 
tests. 

No TNV circuit within the EUT 

N/A 

6.2.1 

Enamel coating on winding wire not considered 
electrical separation unless subject to special 
investigation. 

 N/A 

6.4 

Equipment intended for connection to 
telecommunication network outside plant cable is 
required to be protected against overvoltage from 
power line crosses in accordance with 6.4 and 
Annex NAC. 

 N/A 

6.5 

Equipment connected to a telecommunications 
network and supplied with an earphone intended 
to be held against, or in the ear is required to 
comply with special acoustic pressure tests. 

 N/A 

M.2 

Continuous ringing signals up to 16 mA only are 
permitted if the equipmentis subject to special 
installation and performance restrictions. 

No TNV circuit within the EUT 

N/A