Read Harman Kardon SIGNATURE 2.0 (serv.man13) User Guide / Operation Manual online
T
roubleshooting Guide
47
Signature 2.0
At the
Advanced Settings
menu (Figure OSD-10),
press
¤
Menu Control
i
until
SYSTEM RESET
>
is highlighted. Press
›
Menu Control
i
again.
This will bring up the
System Reset Menu
(Figure
OSD-40). If you wish to exit at this point, press
Menu
j
.
To proceed with the reset, press
¤
Menu Control
i
to
move the highlighted area to the
Yes >
line, and
then press
›
Menu Control
i
.
Figure OSD-40
The next screen (Figure OSD-41) instructs you to proceed
by pressing and HOLDING
by pressing and HOLDING
Store
until the reset is
complete.
Figure OSD-41
Follow that instruction by holding
Store
until the
Reset Completed
message appears briefly on screen
P r e s s a n d h o l d S T O R E
t o a c c o m p l i s h R E S E T
S y s t e m R e s e t M e n u
N O !
Y e s >
! ! ! W A R N I N G ! ! !
A L L S E T T I N G S W I L L B E
L O S T ! !
A R E Y O U S U R E ?
(Figure OSD-42) and the front panel
Information Display
.
This is your indication that the reset has been
accomplished, and you may release the
accomplished, and you may release the
Store
button.
The system will automatically return to the Advanced
Settings menu.
Settings menu.
Figure OSD-42
After a reset the system is returned to the original factory
default settings as shown in Appendix A, and the
microprocessor system is re-initialized. Press
default settings as shown in Appendix A, and the
microprocessor system is re-initialized. Press
Menu
j
twice to return to normal operation, but remember that
you will have to re-enter any settings previously
established that differ from the factory presets.
you will have to re-enter any settings previously
established that differ from the factory presets.
Note: With some video monitors it may happen, that
they loose synchronisation after the reset and the on-
screen menu cannot be read. In that case turn the unit off
(to Standby) and on again. This also will turn off all
previous menus and return the displays to their normal
indication.
they loose synchronisation after the reset and the on-
screen menu cannot be read. In that case turn the unit off
(to Standby) and on again. This also will turn off all
previous menus and return the displays to their normal
indication.
If a reset does not solve the system problem, consult an
authorized Harman Kardon service depot.
authorized Harman Kardon service depot.
R e s e t C o m p l e t e d
Click on the first or last page to see other SIGNATURE 2.0 (serv.man13) service manuals if exist.