Read Harman Kardon SB 30 (serv.man2) EMC - CB Certificate online
Report No:W-N-1109009-CY-01-1
Telecom Technology Center
6.8.4 Test Setup
Note:
TABLE-TOP EQUIPMENT
The configuration consisted of a wooden table (0.8m high) standing on the Ground
eference Plane. The GRP consisted of a sheet of aluminum (at least 0.25mm thick
R
and 2.5m square) connected to the protective
and 2.5m square) connected to the protective
f 0.5m was provided between the EUT and
grounding system. A minimum distance
the walls of the laboratory or any other
ure.
Note: (1) P/N denotes the Positive/Negative polarity of the output voltage.
(2) N/A - denotes test is not applicable in this test report
(3) Criteria A: There was no change operated with initial operating during the
(3) Criteria A: There was no change operated with initial operating during the
test.
(4) Criteria B: The EUT function loss during the test, but self-recoverable after
the test.
(5) Criteria C: The system shut down during the test.
(6) The test was performed in EFT Room.
(6) The test was performed in EFT Room.
o
metallic struct
metallic struct
48
Click on the first or last page to see other SB 30 (serv.man2) service manuals if exist.