Read Harman Kardon PA 2000 (serv.man6) User Guide / Operation Manual online
FRONT PANEL CONTROLS & INDICATORS
5
1
Power Switch: The function of this switch
depends on the setting selected for each of the
rear Power Control Mode Switches £. If the
Power Control Mode Switch £ is in the On
position, the associated amplifier pair will turn on
when Power 1 is pressed in. If the Power
Control Mode Switch £ is in the MUSIC
SENSE position, the associated amplifier pair will
enter Standby when Power 1 is pressed in and
will turn fully on when a signal is present. If the
Power Control Mode Switch £ is in the
AC/DC TRIGGER position, the associated amplifier
pair will enter Standby when Power 1 is
pressed in and will turn fully on when a 3-30 V
signal is present at the Trigger Jack §. For
more information see item 3, page 6.
rear Power Control Mode Switches £. If the
Power Control Mode Switch £ is in the On
position, the associated amplifier pair will turn on
when Power 1 is pressed in. If the Power
Control Mode Switch £ is in the MUSIC
SENSE position, the associated amplifier pair will
enter Standby when Power 1 is pressed in and
will turn fully on when a signal is present. If the
Power Control Mode Switch £ is in the
AC/DC TRIGGER position, the associated amplifier
pair will enter Standby when Power 1 is
pressed in and will turn fully on when a 3-30 V
signal is present at the Trigger Jack §. For
more information see item 3, page 6.
2
Power Indicators: These indicators will light
when either of the channel pairs is on.
3
Standby Indicators: These indicators will
light when AC mains power is applied to either of
the channel pairs, but when that channel pair is
not currently active. In this condition, the channel
pair associated with the indicator is ready to turn
on when a signal is applied to the Trigger Jack
§ or when there is an audio signal applied to
the Input Jack ¡.
the channel pairs, but when that channel pair is
not currently active. In this condition, the channel
pair associated with the indicator is ready to turn
on when a signal is applied to the Trigger Jack
§ or when there is an audio signal applied to
the Input Jack ¡.
4
Protect Indicators: These indicators will
light when either of the channel pairs is in the
Protect mode. When one of these indicators
lights, turn the unit off immediately and check for
a problem, such as a short in the speaker wiring.
Protect mode. When one of these indicators
lights, turn the unit off immediately and check for
a problem, such as a short in the speaker wiring.
Front Panel Controls and Indicators
1
Power Switch
2
Power Indicators
3
Standby Indicators
4
Protect Indicators
Power
CH 1
CH 2
Standby
Power
Protect
1
2
2
3
3
4
Click on the first or last page to see other PA 2000 (serv.man6) service manuals if exist.