Read Harman Kardon MAS 101-102-111 (serv.man3) Service Manual online
5
c
d
d
h
e
f
a
l
k
b
j
i
g
MAS SySteM
Rear-panel connections
Controller
0
FM Antenna Terminal: connect the included fM antenna wire here.
1
DAB Antenna Terminal (MAS 111 Only): connect the included daB antenna wire
lead here to enjoy programming from digital daB, daB+ or t-dMB-audio radio
stations available in your area.
2
USB Port B: connect a compatible uSB device here to enjoy playback of audio MP3
or WMa files. although most uSB flash and hard-disk drives in the fat32 file format,
as well as many MP3 players, are compatible with the MaS system, due to the wide
variety of manufacturers, playback cannot be guaranteed. do not connect an iPod
or iPhone to this port. do not connect a personal computer or any peripherals to this
port.
3
Optical 1/2 and Coaxial 1/2 Digital Audio Inputs: connect a source device’s
optical or coaxial digital audio output to the corresponding input. only the
uncompressed PcM format is supported.
4
TV and AUX Analog Audio Inputs: connect the analog audio outputs of a tele-
vision or any source device to enjoy playback through the high-performance MaS
system.
5
Phono Input: connect the outputs of a moving-magnet (MM) type turntable to this
input. do not connect any other type of turntable to this input, and do not connect
the outputs of an MM-type turntable to any other analog audio inputs on the MaS
system without using a phono preamp, available separately from many electronics
stores.
6
The Bridge IIIP Input: to enjoy playback of audio materials stored on a compatible
iPod (see page 4), connect the Bridge IIIP. Make sure the insert for the Bridge IIIP is
installed, and install the appropriate dock adapter for your iPod within the insert, as
shown in figure 1 on page 10.
7
Analog Audio Outputs: connect these outputs to the analog audio inputs of an
audio recorder. When a source connected to the MaS system is playing, the signal will
be available at these outputs for recording. IMPortant: the analog audio outputs
will mute when the Mute button on the remote is pressed. See page 9.
8
Coaxial Digital Audio Output: connect this output to the coaxial digital audio
input of a digital audio recorder. When the following sources are playing, the signal
will be available at this output for recording: cd, uSB Ports a/B, coaxial 1/2, optical
1/2. the following sources are not available at this output: fM/daB, tV, aux, Phono,
the Bridge IIIP.
NOTES:
The MAS system can convert analog sources to the digital domain, or digital
•
sources to the analog domain for recording.
It is the user’s responsibility to comply with all laws pertaining to the
It is the user’s responsibility to comply with all laws pertaining to the
•
copying of audio materials.
9
Output to Amplifier: connect the included ribbon cable to this connector and to
the corresponding connector on the MaS amplifier. this cable passes audio signals
from the controller to the amplifier, and it transfers dc power from the amplifier
to the controller. If this cable is ever damaged, do not use it, and contact harman
Kardon for a replacement.
A
RS-232 Serial Port: this port is used only for system upgrades. do not connect it to
any devices unless instructed to do so at the time a system upgrade is released.
B
Update Switch: this switch is used only for system upgrades. Leave it in the “n”
position for normal operation unless instructed to switch it to the “u” position to
install a system update.
0257CSK - HK MAS 101-102-111 OM v6.indd 6
08/12/10 9:44:49
Click on the first or last page to see other MAS 101-102-111 (serv.man3) service manuals if exist.