MAS 100-110 (serv.man8) - Harman Kardon Audio Service Manual (repair manual). Page 5

REMOTE CONTROL FUNCTIONS

Turns the MAS 100/MAS 110 on or off. To completely power 

off the unit, unplug the power supply.

Each press increases the time until turn-off, from 10 to 90 

minutes, in increments of 10 minutes. The next press after the 90 min-
utes setting turns off the Sleep function.

Selects a source input. Each press of the Line 

In or Digital In Buttons toggles among the available analog (Line Input on 
right-side panel; TV, AUX or Phono Input on rear panel) or digital audio 
inputs (Coaxial 1 or 2, Optical 1 or 2), respectively. Press the Bridge 
Button to select an iPod docked in The Bridge II.

Adjusts the brightness of the Message Display when hold 

pressed for more than one second in every mode or access to some 
special information on DAB mode if less than one second. In DAB mode, 
selects station-defined information when pressed for less than one 
second. Each press changes the brightness: Full, Half or Off. When the 
display is fully dimmed while the system is turned on, the LED inside 
the Volume Knob and the LED behind the Power Button will remain lit to 
remind you that the system is still on. 

Accesses menus for Speaker Setup (tone controls), Time 

Setup (clock), Alarm Setup, System Version and System Reset. See the 
Operation section for more information.

Returns to previous menu level.

Displays status of current source.

When FM band is in use, each press toggles between the 

PS (Program Service) and RT (Radio Text) RDS information, if avail-
able. When a DAB radio station is playing, press this button to access 
the menu system for the DAB tuner. See pages 14 and 15 for more 
information.

Displays CD Text information, if available. Each press 

displays the following items: Song, Artist, Album. 

Scrolls all ID3 tag information for current 

source, if available. Each press displays the following individual 
items: Song, Artist, Album, File type, Folder, then back to scrolling. If 
ID3 tags are not available, the filename will appear.

Displays elapsed track time for the current Audio CD (no effect 

on data CDs or other sources). Each additional press changes the display 
as follows: remaining track time, elapsed disc time, remaining disc time, 
then back to elapsed track time.

 Use the 

 and   Buttons to 

scroll forward and reverse through the Settings Menus, or through lists of 
content, and press the Enter Button to make selections. Press the Back 
Button to return to the previous menu or content level.

Selects a menu item, or saves setting changes and returns to 

the previous menu level.

Clears the current preset station or a playlist entry.

To delete the current preset station, press the Clear Button 

while it is playing.

While programming a playlist, press to delete the track just 

entered. After the playlist has been saved by pressing the Stop Button, 
press the Clear Button to delete the entire playlist. To delete a single 
track, stop play, press the Check Button repeatedly until the desired 
track appears and press the Clear Button. Press the Play Button to exit 
Check mode.

Used to program playlists and radio presets. 

If the current station has not been programmed into a 

preset, press Program/Memory and press the Enter Button to store 
the station at the current preset number, or use the Numeric Keys to 
enter a different preset number. The new preset will overwrite the 
existing one. 

Press the Program Button 

to begin Program Mode. Add tracks to the playlist by using the Skip/
Scan Transport Controls or the Numeric Keys to select the track, then 
press the Program Button to enter the selection. Add up to 99 files. 
Press Play to play the playlist, or Stop to save the playlist without 
playing it. During playback, the order of the track in the playlist will 
appear on the left, with the disc’s track number to the right. See 
page 16.

After a playlist has been programmed and play has been 

stopped, each press of the Check Button displays the tracks in the 
playlist.

When a CD is loaded, press this button to eject it.

Used with FM radio, each press toggles between Stereo 

and Monaural playback.

Scans through all frequencies, searching for stations 

with acceptably strong signal quality, and stores them as presets. 

 Each press turns Random playback mode (shuffle) on or off. 

This mode plays the tracks of the current disc or drive in random order.

These buttons function differ-

ently, depending on which source has been selected:

 Press and release to skip to the next track. 

Press the reverse button twice to skip to the previous track.

 Press and release the Track Skip Buttons to tune to the 

next higher or lower station by one frequency increment. Press 
and hold to scan quickly through the stations. 

 Press and hold to scan forward or in 

reverse within a track when the iPod, CD or USB sources are playing.

 Each tap toggles between the Play and Pause func-

tions.

 Fully stops playback.

harman/kardon

MAS 100 / MAS 110 / MAS 1 Service Manual

Page 5 of 57