Read Harman Kardon HKTS 7 (serv.man12) User Guide / Operation Manual online
SPEAKER CONNECTIONS 9
Dolby Digital or DTS
®
(or Other Digital Surround Mode)
Connection
Connection
Use this installation method for Dolby Digital,
DTS
DTS
®
or other digital surround processors:
Use the line-level input jack marked "SUB" for
the Low-Frequency Effects channel. Connect this
the Low-Frequency Effects channel. Connect this
jack to the LFE output or subwoofer output
on your receiver or amplifier. Connect each
speaker to the corresponding speaker terminals
on your receiver or amplifier.
on your receiver or amplifier. Connect each
speaker to the corresponding speaker terminals
on your receiver or amplifier.
Make sure that you have configured your sur-
round-sound processor for “Subwoofer On.”
The front left, front right, center and rear speak-
ers should all be set to “Small.”
round-sound processor for “Subwoofer On.”
The front left, front right, center and rear speak-
ers should all be set to “Small.”
Speaker Connections
LINE LEVEL IN
L
R
SUB
SUB/LFE
Out
SUB-TS7 Subwoofer
Receiver
Front
Left
Surround
Left
Front
Right
Right
Surround
Right
Center
Surround
Right
Front
Right
Right
Surround
Left
Front
Left
Center
– +
– +
– +
– +
– +
Click on the first or last page to see other HKTS 7 (serv.man12) service manuals if exist.