HKTS 210SUB (serv.man8) - Harman Kardon Audio Service Manual (repair manual). Page 5

13

HKTS 60BQ/230

ENGLISH

Troubleshooting

This unit is designed for trouble-free operation. Most problems that users encounter are due to operating errors. So if you have a problem, first check this list for a possible solution. If 

the problem persists, consult your authorized harman kardon service centre.

If there is no sound from any of the speakers:

Check that the receiver/amplifier is on and a source is playing.

•

Make sure that all wires and connections between the receiver/amplifier and the speakers are 

•

connected properly.
Make sure none of the speaker wires is frayed, cut or punctured.

•

Review the proper operation of your receiver/amplifier.

•

If there is no sound coming from one speaker:

Check that the balance control on your receiver/amplifier is not set all the way to one channel. 

•

Check your receiver/amplifier’s speaker setup procedure to make sure that he speaker in 

•

question has been enabled and its volume level has not been turned all the way down.
Make sure that all wires and connections between the receiver/amplifier and the speaker are 

•

connected properly.
Make sure the speaker wires are not frayed, cut or punctured.

•

If there is no sound coming from the center speaker:

Check your receiver/amplifier’s speaker setup procedure to make sure that the center speaker 

•

has been enabled and its volume level has not been turned all the way down.
Make sure that all wires and connections between the receiver/amplifier and the center speaker 

•

are connected properly.
Make sure the speaker wires are not frayed, cut or punctured.

•

If your receiver is operating in Dolby

•

®

 Pro logic

®

 mode, make sure that the center speaker is not 

set to Phantom.

you can find additional troubleshooting information in the FAQs link on the Support page at www.harmankardon.com.

Harman/Kardon

HKTS 200 SUB/230 + 210 SUB/230 Service Manual

Page 5 of 18