Read Harman Kardon HK 980 (serv.man3) Service Tips online
Service Information
Harman Kardon HK 980, front and main boards matching.
Models:
HK 980.
Subject:
New front boards do not work with some main boards.
Date:
November 2011, version 2 May 2012.
Please note that the front and main boards MUST match for HK 980 to work correctly after repair.
HK 980 serial numbers lower than FO0001-11844 are the old non-EuP versions.
Use these spare parts:
HK 980 serial numbers lower than FO0001-11844 are the old non-EuP versions.
Use these spare parts:
Main board name
Main board
part number
part number
Main board
software version
software version
Matching front board
name
name
Matching front
board part number
board part number
MAIN (MCU VOL SOURCE
TONE) PCB HK980 V1.2
TONE) PCB HK980 V1.2
0077 1582
00031.4
00031.4
1.4
FRONT (DISPLAY+
SWITCH) PCB HK980
SWITCH) PCB HK980
0077 1011 0002
HK 980 serial numbers from FO0001-11844 are the new EuP versions.
Use these spare parts:
Main board name
Main board
part number
part number
Main board
software version
software version
Matching front board
name
name
Matching front
board part number
board part number
MAIN (MCU VOL SOURCE
TONE) PCB HK980 V1.3
TONE) PCB HK980 V1.3
0077 1582
0003
0003
1.5 (EuP)
FRONT (DISPLAY+
SWITCH) PCB EuP
HK980
SWITCH) PCB EuP
HK980
0077 1011 000B
You can see the main board version number on the board itself, as shown here:
Note:
It is not possible to upgrade a Front board ver. 1.1 to a ver. 1.2 or a main board ver. 1.2 to a ver.
1.3.
SW ver. 1.5 is only for main board ver. 1.3 and may not be applied to main board ver. 1.2.
The software is already loaded in to the boards. Software re-loading should not be required.
Display