HK 690 (serv.man4) - Harman Kardon Audio User Guide / Operation Manual. Page 7

6

ENGLISH

We, Harman Marketing Europe a/s

Kongevejen 194B
DK-3460 Birkerød
DENMARK

declare in own responsibility, that the

product described in this owners manual is

in compliance with technical standards:

EN60065 SISIR(IEC65+A1,2,3)
CB Certificate

Accredited test laboratory:
SEMKO AB
TORSHAMNSGATAN 43
S-164 22 KISTA,
SWEDEN

Birkerød, DENMARK

Steen Michaelsen
Harman Marketing Europe a/s
Birkerød, DENMARK

DECLARATION OF CONFORMITY

We, Harman Marketing Europe a/s

Kongevejen 194B
DK-3460 Birkerød
DENMARK

declare in own responsibility, that the product

described in this owners manual is in

compliance with technical standards:

EN55013/A 12/8.1994, EN55020/12.1994
EN60555 Part 2 & 3/4.1987

Accredited test laboratory:
MIKES PRODUCT SERVICE GmbH

Ohmstrasse 2-4
D-94342 Strasskirchen
GERMANY

Steen Michaelsen
Harman Marketing Europe a/s
Birkerød, DENMARK

DECLARATION OF CONFORMITY

1. Turn Volume control to minimum level

and press the Power switch to turn on
the amplifier. The power indicator
lights up.

2. Set the Speakers switches to play

speakers 1, 2, both or neither (for
headphone use).

3. Press the Source selector button

corresponding to the component you
wish to listen to.

4. Begin playing the desired source.

5. Adjust the Volume control to the

desired level.

6. Adjust Bass, Treble and Balance

controls as desired.

7. To turn off the Tape 1 selection, press

either Video, Tuner, Phono, CD or Aux
button. To turn off Tape 2, press 
Tape 2 again.

When you select Video, Tuner, Phono,
CD og Aux as your sound source,
recordings may be made on tape deck 1
or 2, or both simultaneously. When
making recordings on tape decks 1 and
2 simultaneously, you may listen directly
to the source, or you may monitor tape
deck 2. DO NOT monitor tape deck 1
during this procedure. Pressing Tape 1
will switch off the source.
If you wish to copy a tape, place it in
deck 1, and press the Tape 1 button on
your amplifier. You may then record the
tape using tape deck 2.

NOTE 1: To turn off the Tape 1 selection,
press either Video, Tuner, Phono, CD or
Aux. To turn off the Tape 2, press Tape 2
again.

NOTE 2: To use a 3-head tape deck that
allows monitoring of the actual recording
while it is in process, you must connect it
to TAPE 2 jacks. Pressing Tape 1 will
switch off the source.

NOTE 3: The record output signal is
taken directly from the program source
without being influenced by the Volume,
Bass, Treble or Balance controls.

Your Harman/Kardon integrated amplifier
is equipped with separate outputs from
the preamplifier section marked Pre Out
on the rear panel and separate inputs to
the  power amplifier section marked
Main In on the rear panel. In normal use,
the Left Pre Out socket must be
connected directly to the Left Main In
socket and the Right Pre Out socket
must be connected directly to the Right
Main In socket via the short
interconnects included with the unit.

For more advanced use, the Pre
Out/Main In sockets may be used to
insert equalizers or other processors into
the signal path. They can also be used to
feed an external power amplifier with the
signal from the preamplifier section or to
feed the power amplifier section with the
signal from an external source.
Consult your Harman/Kardon dealer for
additional information.