Read Harman Kardon HK 3480 (serv.man6) User Guide / Operation Manual online
REAR PANEL CONNECTIONS 7
Rear Panel Connections
AM Antenna: Connect the AM loop anten-
na supplied with the receiver to these
terminals. If an external AM antenna is used,
make connections to the AM and GND
terminals in accordance with the instructions
supplied with the antenna.
na supplied with the receiver to these
terminals. If an external AM antenna is used,
make connections to the AM and GND
terminals in accordance with the instructions
supplied with the antenna.
FM Antenna: Connect an indoor or external
FM antenna to this terminal.
FM antenna to this terminal.
Phono Ground: Connect the ground wire
from a turntable to this terminal to reduce sys-
tem hum.
from a turntable to this terminal to reduce sys-
tem hum.
Remote IR In: If the HK 3480’s front panel
IR sensor is blocked due to cabinet doors or other
obstructions, an external IR sensor may be used.
Connect the output of the sensor to this jack.
IR sensor is blocked due to cabinet doors or other
obstructions, an external IR sensor may be used.
Connect the output of the sensor to this jack.
Remote IR Out: This connection permits
the IR sensor in the receiver to serve other
remote controlled devices. Connect this jack to
the “IR IN” jack on Harman Kardon or other
compatible equipment.
the IR sensor in the receiver to serve other
remote controlled devices. Connect this jack to
the “IR IN” jack on Harman Kardon or other
compatible equipment.
Phono Inputs: Connect the outputs of your
turntable or tone arm to these jacks. Note that
only Moving Magnet (MM) type cartridges may
be used.
turntable or tone arm to these jacks. Note that
only Moving Magnet (MM) type cartridges may
be used.
CD Inputs: Connect these jacks to the out-
put of a compact disc player or CD changer.
put of a compact disc player or CD changer.
Video 1 Audio/Video Play/In: Connect
these jacks to the PLAY/OUT jacks of an audio or
video device, such as a VCR or DVD player. In
order to view the video signal of a video device
connected to this input, remember to connect the
Video Monitor Output
these jacks to the PLAY/OUT jacks of an audio or
video device, such as a VCR or DVD player. In
order to view the video signal of a video device
connected to this input, remember to connect the
Video Monitor Output
to the video input
of your TV or video display.
Tape Monitor Play/In: Connect these jacks
to the Play/Out jacks of an audio recorder.
to the Play/Out jacks of an audio recorder.
Tape Monitor Record/Out: Connect these
jacks to the Rec/In jacks of an audio recorder.
jacks to the Rec/In jacks of an audio recorder.
NOTE: When these jacks are connected to a
three-head recorder or another device with off-
head playback, it will be possible to monitor the
source being recorded.
three-head recorder or another device with off-
head playback, it will be possible to monitor the
source being recorded.
Video 1 Audio/Video Record/Out:
Connect these jacks to the Rec/In jacks of an
audio or video recorder.
Connect these jacks to the Rec/In jacks of an
audio or video recorder.
Video 2 Audio/Video Inputs: Connect
these jacks to the PLAY/OUT jacks of an audio or
video device, such as a VCR or DVD player. In
order to view the video signal of a video device
connected to this input, remember to connect the
Video Monitor Output
these jacks to the PLAY/OUT jacks of an audio or
video device, such as a VCR or DVD player. In
order to view the video signal of a video device
connected to this input, remember to connect the
Video Monitor Output
to the video input
of your TV or video display.
Main In: These jacks are the input to the
HK 3480’s power amplifier. Unless an external
power amplifier is used, the jumper pins should
remain connected to the Preamp Out jacks
HK 3480’s power amplifier. Unless an external
power amplifier is used, the jumper pins should
remain connected to the Preamp Out jacks
.
Video 3 Audio/Video Inputs: Connect
these jacks to the PLAY/OUT jacks of an audio or
video device, such as a VCR or DVD player. In
order to view the video signal of a video device
connected to this input, remember to connect
the Video Monitor Output
these jacks to the PLAY/OUT jacks of an audio or
video device, such as a VCR or DVD player. In
order to view the video signal of a video device
connected to this input, remember to connect
the Video Monitor Output
to the video
input of your TV or video display.
Preamp Out: These jacks provide an output
for the left and right channels to an optional
external amplifier. In normal operation, unless
an external power amplifier is used, the jumper
pins should remain connected to the Main In
jacks
for the left and right channels to an optional
external amplifier. In normal operation, unless
an external power amplifier is used, the jumper
pins should remain connected to the Main In
jacks
.
Subwoofer Out: Connect these jacks to the
line-level input of a powered subwoofer. If an
external subwoofer amplifier is used, connect this
jack to the subwoofer amplifier input. When a
single, mono subwoofer is used, make the con-
nection to the bottom jack.
line-level input of a powered subwoofer. If an
external subwoofer amplifier is used, connect this
jack to the subwoofer amplifier input. When a
single, mono subwoofer is used, make the con-
nection to the bottom jack.
Speaker 1 Terminals: Connect these ter-
minals to the appropriate terminals on your
speakers.
minals to the appropriate terminals on your
speakers.
Speaker 2 Terminals: Connect these ter-
minals to the appropriate terminals on your
speakers.
minals to the appropriate terminals on your
speakers.
NOTE: The power consumption of the devices
plugged into these outlets should not exceed
100 watts.
plugged into these outlets should not exceed
100 watts.
Switched AC Outlet: These outlets may be
used to power low-current draw devices such as
CD players or cassette decks. The power to these
outlets remains on as long as the receiver itself
is on. When the receiver is turned off, or placed
in the Standby mode, power to these outlets is
removed.
used to power low-current draw devices such as
CD players or cassette decks. The power to these
outlets remains on as long as the receiver itself
is on. When the receiver is turned off, or placed
in the Standby mode, power to these outlets is
removed.
Power Cable: Connect the AC plug to a
nonswitched AC wall output.
nonswitched AC wall output.
Video Monitor Output: Connect this jack
to the composite video input of your TV or video
display device. Doing so will enable you to view
the video signal of a properly connected video
source device, when that source input is select-
ed. When an audio-only source is selected, the
Video Monitor Output
to the composite video input of your TV or video
display device. Doing so will enable you to view
the video signal of a properly connected video
source device, when that source input is select-
ed. When an audio-only source is selected, the
Video Monitor Output
will not transmit a
video signal.
Click on the first or last page to see other HK 3480 (serv.man6) service manuals if exist.