Read Harman Kardon HK 3370 (serv.man10) User Guide / Operation Manual online
REMOTE CONTROL FUNCTIONS 9
Remote Control Functions
The remote is capable of operating the HK3370
and most Harman Kardon CD changers or
players, CD Recorders and Tape decks, using the
control codes that are part of the remote.
and most Harman Kardon CD changers or
players, CD Recorders and Tape decks, using the
control codes that are part of the remote.
å
Main Power On: When the HK 3370
is in the Standby mode, as indicated by the
Power Indicator 3 glowing amber, press
this button to turn the HK 3370 on.
Power Indicator 3 glowing amber, press
this button to turn the HK 3370 on.
∫
Main Power Off: When the HK 3370 is
turned on, press this button to place it in the
Standby mode. Note that in this condition,
the unit is still connected to AC Power.
Standby mode. Note that in this condition,
the unit is still connected to AC Power.
ç
Source Selectors: Press these buttons to
select an input source for the HK 3370 (for specifics
of Tape Monitor see item 9 on page 5).
of Tape Monitor see item 9 on page 5).
∂
Preset Up/Down: When the tuner is in use,
these buttons scroll through the stations that
have been programmed into the HK 3370’s
memory. These buttons also control the track Skip
Up and Down on compatible Harman Kardon
compact disc players/changers, CD-Recorders and
cassette decks (with that function).
have been programmed into the HK 3370’s
memory. These buttons also control the track Skip
Up and Down on compatible Harman Kardon
compact disc players/changers, CD-Recorders and
cassette decks (with that function).
≠
Transport Controls: These buttons are used
to control Play, Play Forward, Play Reverse, Stop,
Pause and Record functions on compatible Harman
Kardon compact disc players/changers and cassette
tape decks.Also, when a compatible Harman
Kardon compact disc player or changer, or cas-
sette deck, has been selected using the Source
Selectors ç, additional transport control func-
tions are available using the Preset Up/Down
∂
Pause and Record functions on compatible Harman
Kardon compact disc players/changers and cassette
tape decks.Also, when a compatible Harman
Kardon compact disc player or changer, or cas-
sette deck, has been selected using the Source
Selectors ç, additional transport control func-
tions are available using the Preset Up/Down
∂
and Tuning Up/Down ü buttons.
ƒ
Disc Skip: These buttons do not have any
functions when controlling the HK 3370, but they
operate the Disc Skip functions of compatible
Harman Kardon compact disc changers.
operate the Disc Skip functions of compatible
Harman Kardon compact disc changers.
©
Sleep Button: Press this button to place
the unit in the Sleep mode. Each press of the
button selects the amount of time that will
remain before the unit will automatically go into
the Standby mode, as shown in the Main Infor-
mation Display Û, in the following order:
button selects the amount of time that will
remain before the unit will automatically go into
the Standby mode, as shown in the Main Infor-
mation Display Û, in the following order:
Holding the button pressed for some seconds
will directly turn off the Sleep time selection.
will directly turn off the Sleep time selection.
˙
Dimmer Button: Press this button once to
reduce the brightness of the front panel display
to half the normal intensity. Press it again to turn
the front panel display completely off. When the
display is completely off, press the button to
return to normal brightness.
to half the normal intensity. Press it again to turn
the front panel display completely off. When the
display is completely off, press the button to
return to normal brightness.
î
Main Tuning Buttons: When the tuner is in
use, these buttons will tune up or down through
the selected frequency band. A brief press of the
button will manually tune to the next frequency
increment, while pressing and holding the button
for a longer period (>0.5 sec) will step quickly
through the frequencies. As soon as the button
is released the unit will automatically tune to the
next station with a signal strong enough for
acceptable reception. When a HK CD Recorder is
in use these buttons will select the transport (Play
or Record Deck).
the selected frequency band. A brief press of the
button will manually tune to the next frequency
increment, while pressing and holding the button
for a longer period (>0.5 sec) will step quickly
through the frequencies. As soon as the button
is released the unit will automatically tune to the
next station with a signal strong enough for
acceptable reception. When a HK CD Recorder is
in use these buttons will select the transport (Play
or Record Deck).
∆
Direct Button: Press this button to select a
radio station by entering its frequency using the
Numeric Keys. (See page12 for more informa-
tion.)
Numeric Keys. (See page12 for more informa-
tion.)
˚
Numeric Keys: These buttons serve as a
ten-button numeric keypad to enter tuner preset
positions or track numbers with CD players/
changers or to tune stations directly.
positions or track numbers with CD players/
changers or to tune stations directly.
¬
Auto Preset: When the tuner and FM band
have been selected, this button may be used to
automatically program the tuner presets for all
stations with acceptable signal strength.
To start the auto preset scan, press and hold the
button. Note that the MEMO and PRESET indi-
cators will flash. Keep holding the button
pressed until the tuner will start to “look” for
stations, as shown by increasing frequency num-
bers in the Information Display. Release the but-
ton and note that the tuner will search the entire
FM band and stop briefly at each station that
has acceptable signal strength. The HK3370 will
automatically assign a preset number to each
station and then search for the next station. If
the FM tuner finds fewer than 30 FM stations
with acceptable signal strength, the Auto Preset
tuning will scan two more cycles or until the
remaining vacant preset memory spaces have
been filled with those found in the first scan. The
scan will stop when all 30 preset memory spaces
have been filled or when three scans through
the band have been completed (see page 13 for
more information).
automatically program the tuner presets for all
stations with acceptable signal strength.
To start the auto preset scan, press and hold the
button. Note that the MEMO and PRESET indi-
cators will flash. Keep holding the button
pressed until the tuner will start to “look” for
stations, as shown by increasing frequency num-
bers in the Information Display. Release the but-
ton and note that the tuner will search the entire
FM band and stop briefly at each station that
has acceptable signal strength. The HK3370 will
automatically assign a preset number to each
station and then search for the next station. If
the FM tuner finds fewer than 30 FM stations
with acceptable signal strength, the Auto Preset
tuning will scan two more cycles or until the
remaining vacant preset memory spaces have
been filled with those found in the first scan. The
scan will stop when all 30 preset memory spaces
have been filled or when three scans through
the band have been completed (see page 13 for
more information).
µ
Secondary Control Cover: This sliding
cover normally hides the secondary controls. To
access these controls, gently press the cover down
and towards you.
access these controls, gently press the cover down
and towards you.
Ñ
Clear Button: This button is used to clear
preset memory information for the HK 3370’s
tuner. (See page 13 for more information on tuner
presets.)
tuner. (See page 13 for more information on tuner
presets.)
ø
Memory Button: Press this button to open
a memory position that stores a preset location
for the HK 3370’s tuner. (See page13 for more
information on tuner presets.)
for the HK 3370’s tuner. (See page13 for more
information on tuner presets.)
π
Master Volume: Press these buttons to
raise or lower the HK 3370’s volume.
œ
P. Scan Button: Press this button to auto-
matically scan through the list of stations that are
programmed into the HK 3370’s tuner memory.
When the button is pressed, each preset station
will play for five seconds before the next station is
selected. Press the button again when the desired
station is heard to stop the preset scan.
programmed into the HK 3370’s tuner memory.
When the button is pressed, each preset station
will play for five seconds before the next station is
selected. Press the button again when the desired
station is heard to stop the preset scan.
®
Mute Button: Press this button to momen-
tarily silence the HK 3370.
ß
FM Mode Button: Press this button when
the tuner is in use in the FM band to switch to
monaural reception if the stereo station is weak
and noisy. (See page12 for more information.)
monaural reception if the stereo station is weak
and noisy. (See page12 for more information.)
†
Tuning Up/Down: When the tuner is in use,
these buttons work in the same way as the
Main Tuning buttons î described above. But
if CD or Tape is in use, these buttons will also
control Fast Forward and Fast Reverse (or
Rewind) for compatible Harman Kardon compact
disc players/changers, CD-Recorders and cas-
sette tape decks.
Main Tuning buttons î described above. But
if CD or Tape is in use, these buttons will also
control Fast Forward and Fast Reverse (or
Rewind) for compatible Harman Kardon compact
disc players/changers, CD-Recorders and cas-
sette tape decks.
ü
Speaker 1 Selector: Press this button to
turn the speakers connected to the Speaker 1
Output terminals
Output terminals
on or off.
√
Speaker 2 Selector: Press this button to
turn the speakers connected to the Speaker 2
Output terminals
Output terminals
on or off.
∑
Transmitter Window: Point this area of the
remote toward the receiver when using the
remote.
remote.
RDS Display Button: Press this button to
view the various displays of the RDS options that
are available when a station is transmitting RDS
data. (See pages 13–14 for more information on
RDS tuning.)
are available when a station is transmitting RDS
data. (See pages 13–14 for more information on
RDS tuning.)
RDS PTY Button: Press this button to start
a search for a specific PTY type using the RDS
capabilities of the HK 3370 RDS. (See pages
13-14 for more information on RDS tuning.)
capabilities of the HK 3370 RDS. (See pages
13-14 for more information on RDS tuning.)
90
min
80
min
70
min
60
min
50
min
40
min
30
min
20
min
10
min
OFF
Click on the first or last page to see other HK 3370 (serv.man10) service manuals if exist.