Read Harman Kardon HK 3270 (serv.man4) User Guide / Operation Manual online
Rear Panel Connections
8
ENGLISH
ª
Tape Monitor Play/In:
Connect
these jacks to the Play/Out jacks of
an audio recorder.
an audio recorder.
‚
Tape Monitor Record/Out:
Connect these jacks to the Rec/In
jacks of an audio recorder.
jacks of an audio recorder.
NOTE:
When these jacks are
connected to a three-head recorder
or another device with off-head
playback, it will be possible to
monitor the source being recorded.
or another device with off-head
playback, it will be possible to
monitor the source being recorded.
⁄
Tape 2 Play/In:
Connect these
jacks to the PLAY/OUT jacks of a
second audio recorder.
second audio recorder.
¤
Tape 2 Record/Out:
Connect
these jacks to the Rec/In jacks of a
second audio recorder.
second audio recorder.
‹
Main In:
These jacks are the input
to the HK3270 RDS’s power amplifier.
Unless an external power amplifier is
used, the jumper pins should remain
connected to the
Unless an external power amplifier is
used, the jumper pins should remain
connected to the
Preamp Out
jacks
›.
›
Preamp Out:
These jacks
provide an output for the left and
right channels to an optional
external amplifier. In normal
operation, unless an external power
amplifier is used, the jumper pins
should remain connected to the
right channels to an optional
external amplifier. In normal
operation, unless an external power
amplifier is used, the jumper pins
should remain connected to the
Main In
jacks ‹.
fi
Subwoofer Out:
Connect these
jacks to the line level input of a
powered subwoofer. If an external
subwoofer amplifier is used, connect
this jack to the subwoofer amplifier
input.
powered subwoofer. If an external
subwoofer amplifier is used, connect
this jack to the subwoofer amplifier
input.
fl
Speaker 1 Terminals:
Connect
these terminals to the appropriate
terminals on your speakers.
terminals on your speakers.
‡
Speaker 2 Terminals:
Connect
these terminals to the appropriate
terminals on your speakers.
terminals on your speakers.
°
Switched AC Outlet:
This outlet
may be used to power any device
that you wish to have turn on when
the unit is turned on with the
that you wish to have turn on when
the unit is turned on with the
System
Power Control
switch 2.
NOTE:
The power consumption of
the device plugged into this outlet
should not exceed 100 watts.
should not exceed 100 watts.
·
Power Cable:
Connect the AC
plug to a non-switched AC wall
output.
output.
Click on the first or last page to see other HK 3270 (serv.man4) service manuals if exist.